Re-roofing and Class C
Planning permission is the system that controls what gets built and altered, and permitted development is the set of changes the government has already granted permission for, so no application is made. For houses, the rules sit in Part 1 of Schedule 2 to the General Permitted Development Order 2015. Roof work falls under two classes there, and the one that applies to ordinary re-covering is Class C.
Class C reads "Any other alteration to the roof of a dwellinghouse." The government's technical guidance spells out what that means in practice: "Class C covers other alterations to roofs such as re-roofing or the installation of roof lights/windows." Re-roofing a house is therefore normally permitted development, and the word normally is the government's own.
Planning and Building Regulations are separate questions, and a job can pass one and still meet the other. A re-roof that needs no planning application can still need Building Regulations approval, and the tests for that are in Building Regulations for roof work. The rest of this page deals with planning alone.
Three things can change the answer for a given house: the limits written into Class C, an Article 4 direction made by the council, and listed status. Dormers sit apart from all three, under Class B.
The limits written into Class C
Class C has conditions, and a roof alteration is permitted development only while it keeps within them. Two limits concern how far the alteration stands proud of the roof and how high it reaches. A third excludes certain parts altogether. The table sets them side by side.
| Limit | What it controls |
|---|---|
| C.1(b) | Projection from the original roof slope: 0.15 metres |
| C.1(c) | Height against the highest part of the original roof |
| C.1(d) | Chimneys, flues, soil and vent pipes, solar equipment |
Condition C.1(b) rules out an alteration that "would protrude more than 0.15 metres beyond the plane of the slope of the original roof ". Condition C.1(c) rules out one where "it would result in the highest part of the alteration being higher than the highest part of the original roof". A flush roof window and an ordinary re-covering sit within both.
Condition C.1(d) takes out "the installation, alteration or replacement of a chimney, flue or soil and vent pipe", together with solar photovoltaics and solar thermal equipment. Work on those parts is outside Class C, so a roof job that includes a chimney stack or a flue needs a separate look at the planning position for that part.
Roof windows on a side slope
Class C comes with a condition about windows, and it is easy to get half right. Condition C.2 says that any window on a roof slope forming a side elevation of the house must be obscure-glazed, and non-opening unless the parts of the window which can be opened are more than 1.7 metres above the floor of the room in which the window is installed.
The two requirements are not alternatives. The glass is obscure-glazed in every case. The 1.7 metre figure relaxes only the second requirement, so a window with an opening part that sits high enough may open, and one that sits lower must be fixed shut. Both versions still have the obscure glass. The government's guidance adds that side windows should be obscure glazed to a minimum of level 3.
- side slope: obscure glass, always
- side slope, opening part below 1.7 metres: fixed shut
- side slope, opening part above 1.7 metres: may open
- front or rear slope: the side-slope condition does not apply
The planning wording speaks of "roof lights/windows" together, so the condition reaches both kinds of glazed unit. The difference between the two products does its work in the energy rules, not in planning, and the Building Regulations guide covers it.
Dormers and Class B
A dormer enlarges the roof space, and that is Class B territory, not Class C. Class B covers roof enlargements, with a volume limit of 40 cubic metres in the case of a terrace house, and 50 cubic metres in any other case.
Class B has an exclusion that Class C lacks. It does not apply where "the dwellinghouse is on article 2(3) land". The government's guidance lists what that covers: "In National Parks, the Broads, areas of outstanding natural beauty, conservation areas, and land within World Heritage Sites, roof extensions are not permitted development and will require an application for planning permission."
Areas of outstanding natural beauty are now called National Landscapes, and the Chilterns is one. Dormers there need planning permission, and so do dormers in a conservation area. Applications in the Chilterns still go to the local council. The Chilterns Conservation Board answers consultations in an advisory capacity and decides nothing itself, a point that is easy to miss.
The exclusion is specific to Class B. On article 2(3) land the dormer rules of Class B fall away, while Class C carries on as before, so ordinary re-roofing keeps its normal position inside a conservation area or a National Landscape. Dunstable's own council, Central Bedfordshire, publishes where its conservation areas lie, and the question for any address is which designation, if any, it sits in.
Article 4 directions and conservation areas
An Article 4 direction is, in GOV.UK's words, a direction that "enables the Secretary of State or the local planning authority to withdraw specified permitted development rights across a defined area". What a direction takes away depends on the council's own list, so the wording of the list is the only safe guide.
Central Bedfordshire's page says that "Permitted development rights are stricter for properties within conservation areas." Its directions cover different works in different places. Fairfield parish has a direction in force from 5 January 2021, and its list of works that now need a planning application includes "roof enlargements (e.g., dormer windows)" and "additional storeys on roofs of dwellings". Toddington and Husborne Crawley have directions too, covering extensions, porches, outbuildings and similar works, with no roof item on the list.
| Place | Council | What the list names |
|---|---|---|
| Fairfield | Central Bedfordshire | Dormers, additional storeys |
| Hitchin, Stockens Green | North Herts | Roof alterations, chimneys |
| Wolverton, Olney | Milton Keynes | Alterations, extensions, porches |
| Luton | Luton Council | Mostly changes of use |
North Herts says its Hitchin and Stockens Green directions cover "alterations to a roof of dwellinghouse" and "installation, alteration or replacement of a chimney, flue or soil and vent pipe". Milton Keynes City Council's Wolverton and Olney pages say that repairs which do not "materially affect the external appearance" are not development. St Albans names four areas with directions, and for everywhere else the sensible step is to ask the council whether a direction applies.
Listed buildings, flats and later extensions
Listing does not remove Classes B or C. A listed home keeps its permitted development rights for roof work. Listed building consent comes into it when work reaches the home's character, which the law puts as "in any manner which would affect its character as a building of special architectural or historic interest". A new covering changes what a roof looks like, so the practical step is to ask the council before any work.
Flats are different. The order's term "dwellinghouse" does not include a building containing flats, so a flat has no householder permitted development rights for roof work. A roof alteration above a flat goes through a planning application or a council's own advice, never through Class C.
A conservatory or extension added after the house was built raises a fine point. The government's guidance defines "original" as "a building as it existed on 1 July 1948 where it was built before that date, and as it was built if built after that date." A later conservatory has no original slope, so the 0.15 metre and ridge-height limits do not settle a lantern or dome on one. That case is a question for the council.
For a place of worship the denomination decides the consent route, since only some are exempt from listed building consent, and a council's planning team can say which applies. Wherever a roof job touches a designation, what the council says is what settles it, and it is better obtained before work than argued afterwards.
Asking the council before work starts
The planning team at your local council has the final word on all of this. A short enquiry saying what the work is, which slope it is on and what the address is gets an answer, in writing if you ask for it, that applies to your house and not to houses in general. Central Bedfordshire invites people to find conservation areas by entering a postcode on its My Central Bedfordshire map, and Watford offers a postcode or map search for conservation areas and Article 4 directions.
On our side, the council hears about the planning route early, before work begins. A photo of the slope in question can go to us on WhatsApp first, which helps when the question is about a particular window or dormer. After the survey comes a single written total.
When you compare roofers, and before you accept any quote, ask each one whether anyone has put the question to your council, and which council that was. A firm that can answer with names and dates is working from the council's own wording rather than from habit. Choosing between firms is covered in choosing a roofer, and more about the firm sits on the Daylight Roofing homepage.

