01 Where an extension meets the house
An extension roof abuts the old house wall, and the seal between them is a flashing of lead or a flexible strip tucked into the brickwork. Look along the line for a gap at the top, mortar that has fallen from the joint it was tucked into, or a trail of stain on the wall. Inside, a damp patch where the extension ceiling meets the old wall is a mark of failure. Tapping the wall gently near the join can show a hollow patch.
On an extension, the join is where two different structures move at different rates, so it can open up even where the slopes above are still sound. Lead is cut and dressed to suit each detail, and the specification sets the code. The lead roofing and leadwork page sets out the work. A photograph of the join, sent to the WhatsApp number 07880 284133, shows whether it is the flashing or the covering. Sealant smeared over a failing flashing hides the fault for a season and does not cure it, so a repair goes back to sound materials. Old lead that is still thick and sound can sometimes be re-dressed; lead that has cracked along its folds is replaced instead.

