Call 01582 935272

Roofing guide

What is a building regulations completion certificate?

A completion certificate is the paper that closes a Building Regulations job. It counts most when you sell, because a buyer's solicitor can ask to see it.

Get a written quote

Call 01582 935272WhatsApp us

A gutter full of moss and debris below a tiled roof
PicturedA gutter full of moss and debris below a tiled roof.

The short answer

A building regulations completion certificate is the document a council's building control gives you once it is satisfied that finished work complies with the Regulations, under regulation 17 of the Building Regulations 2010. Where a registered building control approver handles the job, the document is a final certificate, under section 51 of the Building Act 1984.

A roof drawing with its parts named: ridge tiles, tiles, battens, underlay, raftersRidge tilesTilesBattensUnderlayRafters

Completion certificate or final certificate

Building control is carried out by the council's building control team or by a registered building control approver, and the certificate at the end carries a different name depending on which one dealt with the job. Council building control issues a completion certificate, under regulation 17 of the Building Regulations 2010. A registered approver issues a final certificate, under section 51 of the Building Act 1984.

Central Bedfordshire Council puts the council's side plainly on its own building control page: "If the work complies with the Building Regulations, we issue a completion certificate." The wording is the council's, and the point to take from it is that the certificate follows a check of the finished work, not the paperwork alone. Other councils publish their own pages, so check the one that covers your address.

Who issues which certificate
Building control routeCertificate
Council building control teamCompletion certificate
Registered building control approverFinal certificate

Either document serves the same practical purpose: it records a check of the finished work against the Regulations. The names differ because the law differs for the two routes, and a solicitor reading your papers will accept either one. Ask whoever handles building control on your job to say, in writing, which of the two you should expect, so you know what to file when the job closes.

When roof work needs one

Not every roof job needs a certificate. The Planning Portal says: "In most situations, this work will need Building Regulations approval." Its interactive guide adds that a re-roof touching under 25 per cent of the building envelope and under 50 per cent of the roof is not normally in need of an application. A full re-roof goes past either limit, as the guide describes it, so approval and a certificate at the end follow.

Other roof work reaches the same point. A new covering that is 15 per cent or more heavier needs approval, and so does removing a chimney breast, which forms part of the structure. A loft conversion, a new roof window in some cases, and a solid roof on a conservatory also lead to building control, which is why the route should be agreed before work starts. Ask the council's building control team which applies to your job.

Choose the route before the work begins. Applying afterwards is possible in some cases, but it can mean opening up finished work for inspection. The guide to Building Regulations for roof work sets out which jobs need approval and which do not.

Why a buyer asks for it

When you sell, the buyer's solicitor looks for evidence that significant building work was approved and signed off. A completion certificate or final certificate is that evidence for work covered by the Regulations. Without one, the solicitor may raise a query, ask for indemnity cover or seek a price reduction, and the sale can slow down while the point is settled. Having the certificate ready when the sale is listed avoids that delay.

Keep the certificate with your deeds, together with any plans, specifications and the contractor's invoices. Store a scanned copy somewhere separate from the paper original so that a flood or a house move cannot lose both. If a certificate for older work has gone missing, the council's building control team may hold a record and can be asked.

Whoever does the work, ask in writing at quote stage how the certificate will be obtained and what document you will hold at the end of the job. Daylight Roofing surveys the roof before a price goes on paper, and the home page explains how that works. A conversation about the route belongs at that stage, well before anyone lifts a tile, and a firm that has done the job properly will not mind being asked.

Certificates, answered

01Is a completion certificate the same as Building Regulations approval?

No. Approval is the permission or the acceptance of your application at the start, while the completion certificate is issued at the end, once the finished work has been checked and found to comply. For a registered approver the equivalent end document is a final certificate. Keep both the early paperwork and the certificate, because together they record the original agreement and the final sign-off.

02Do I need a certificate for a small roof repair?

A small repair that stays under the limits in the Planning Portal's guide does not normally need an application, and so produces no certificate. A full re-roof, a heavier covering or the removal of a chimney breast does lead to approval and a certificate. If you are unsure which side your job falls on, ask the council's building control team before the work starts.

03Can a certificate be obtained after the work is finished?

Sometimes, but the route is harder. Building control may need to inspect work that is already covered, which can mean opening up parts of the roof, and it may not be able to issue the same certificate. Raising the question with the council's building control team early, ideally before work begins, avoids that. A buyer's solicitor can also advise on what they will accept.

04Does a registered approver's final certificate carry less weight?

No weight difference is stated in the law: the council issues a completion certificate under regulation 17 and a registered approver a final certificate under section 51 of the Building Act 1984. Both record that the work was checked. Registration with the Building Safety Regulator began on 6 April 2024, and the approver you use should be on that register, so ask for the registration details.

Get a written price for your roof

10-year workmanship guarantee, in writing

Tell us about your roof

Call WhatsApp Written quote