Call 01582 935272

Campton · 17 road miles north-east

Roofers in Campton

Lead, zinc and tiled roofs in Campton, 16.9 road miles north-east of Dunstable, from a manor listed Grade II* to a village pub, priced in writing after a survey.

Get a written quote

Call 01582 935272WhatsApp us

Council
Central Bedfordshire
Road miles
17
Building control
Central Bedfordshire

A Grade II* manor, a pub and Campton roofs

Campton is a village in Bedfordshire, reached from Dunstable by 16.9 road miles heading north-east, which takes about 28 minutes. Campton and Chicksands parish had 1,895 usual residents at the 2021 Census. Listed buildings in the parish include a manor, a parish church, a pub and a cottage. Lead and zinc work on any roof, from flashings to whole metal coverings, is set out on the lead roofing page. Every roof is surveyed first, and the findings are given in plain words. A picture of the roof sent to 07880 284133 gets a first look before a visit.

Central Bedfordshire Council is where planning questions for Campton go. The Wrest Park, Meppershall and Shefford conservation areas are all close to Campton, which cannot tell you whether a particular house is inside any of them, so the council is asked about the address. Parish Church of All Saints and Campton Manor are both Grade II*, and The White Hart Public House and Poste Cottage are Grade II. The planning guide explains the ordinary tests.

  1. 01Campton ManorThe manor is listed Grade II*, and as a house it keeps its roof rights, while listed building consent decides what can change.
  2. 02All Saints churchA Church of England church in use, All Saints is Grade II*, and its roof work goes through the faculty system.
  3. 03The White HartThe village pub is Grade II, which brings listed building consent into any change to its covering or rainwater goods.
  4. 04Metal roofingLead and zinc roofs are made to standards and specifications, and the detail drives both the life and the price.
A flint and brick cottage with a clay tile roof beside a quiet road

The roof, in plain words

Lead code
A number from 3 to 8 showing the thickness of rolled lead sheet.
Zinc roof
A roof covered in sheets of zinc, folded at the joints.
Algae
Dark green or black growth that spreads on a damp surface.
Reverse charge
A VAT rule making the customer account for the VAT in some building work.

The plain-as-day roof check

Metal, moss and manor-scale roofs: four checks for Campton

4 checks about 3 minutes to read

  1. Lead sheet and its codes
  2. Zinc and other metal roofs
  3. Weight and sag on older roofs
  4. Moss, algae and roof cleaning

01 Lead sheet and its codes

Lead sheet is rolled to a code, and the code sets the thickness. Under BS EN 12588, codes run from 3 to 8: code 3 is 1.32 mm, code 4 is 1.80 mm, code 5 is 2.24 mm, code 6 is 2.65 mm, code 7 is 3.15 mm and code 8 is 3.55 mm. Calder and Ecobat, two makers of lead sheet, publish weight charts, and their weights are not identical for every code: code 3 is 14.97 kg/m2 from Calder and 15.0 from Ecobat, and code 6 is 30.05 and 30.10. The thickness is what resists wear, so a quote that names only lead, with no code, leaves the main question open.

So a weight only means something with a maker's name beside it. Which code goes into a gutter, a valley or a flashing is a decision for the specification of the job, and a quote should state the code for each detail. MyJobQuote says correctly installed lead flashing "can last for over 80 years", and for higher codes "over 100 years" with minimal maintenance. A roof with several lead details can carry more than one code.

02 Zinc and other metal roofs

Some buildings carry a metal roof in place of tiles. VMZinc, the maker, says "When correctly designed and installed a zinc roof can last in excess of 100 years." The words that matter are correctly designed and installed. Look for open or lifting seams, dents that hold water, and staining below where a seam meets a wall. The metal itself does not rot in the way timber does, so the faults that show are at the joints and the fixings. A photograph taken from the same spot each season shows whether a seam is opening.

Lead lifespans differ by source: HomeBuilding gives a lead flat roof 60-100 years and Less says "Lead is the longest-lasting option at 50 to 100 years". A lifespan for a particular Campton building comes from a survey of the metal, the substrate under it and the falls, which also decides what a repair or a replacement involves. The lead roofing page describes the work.

03 Weight and sag on older roofs

An old roof on a manor or a pub carries a lot of timber and covering, and over time its line can change. Look along the ridge and the eaves for a dip, a bow or a ripple, and check whether a door or window frame below has gone out of square. Do not climb up to look. Photographs of the roof from the same spot a few months apart show whether anything is moving, and a ceiling crack that widens is worth reporting.

A heavier new covering matters. On the Planning Portal's pages, approval turns on whether a new covering raises the roof covering's weight by "15 per cent or more"; a structural engineer or surveyor is to be consulted before work starts. Approved Document A puts it this way: "A significant change in roof loading is when the loading upon the roof is increased by more than 15%." The direction of any weight change depends on the actual covering and its fixings, and the survey reads those before anything is ordered.

04 Moss, algae and roof cleaning

Green or black growth on a roof looks bad, but whether it harms the covering depends on the material and how long it has been there. Marley says that "The use of high powered jet washes is not recommended as it can damage the surface of the slate or tile, thus reducing its expected life considerably". Checkatrade (April 2026) says roof cleaning typically costs £8.50 to £14 per m², a rate for each square metre and not a total for a roof. Access, height and the state of the covering all bear on what cleaning a particular roof involves.

Moss can lift tile edges and fill gutters, and a clean surface does not mend a slipped tile or a cracked pointing line. Cleaning on a high or fragile roof is not a job to do from a ladder. If moss is thick at the gutter, a survey looks at the roof below it before anyone brushes it off. The roof repairs page covers the repairs that cleaning can reveal. The price of cleaning is not the price of repair.

The dashed ring takes in the nearest towns and villages we cover around Campton. Map tiles © Esri; map data © OpenStreetMap contributors.

Campton's manor, pub and village roof questions

01Should a moss-covered Campton roof be cleaned or replaced?

Moss alone does not tell you the roof is finished. It can hold moisture against the covering and clog a gutter, but the covering beneath may be sound. A survey looks at the tiles or slates, the fixings and the lead before recommending anything. Marley does not recommend high powered jet washing. A written price follows the survey, and a photograph of the moss sent to 07880 284133 shows how much there is and where it sits. Never brush moss down from a ladder. Where moss has grown thick under a tree, the gutter below is worth clearing first, reached only from a secure position at ground level.

02What do published guides say chimney lead repair costs near Campton?

MyJobQuote (22 September 2026) says "A chimney lead flashing patch repair typically costs around £200, while a full replacement averages around £570." MyJobQuote's numbers cover chimney leadwork alone, not lead flat roofs, bays or valleys. It also says correctly installed lead flashing can last for over 80 years. They are guide figures and not our price: our total comes in writing after a survey of the stack and the roof around it, and a stack with a lean is looked at before the leadwork.

03What route does a roof repair at All Saints church in Campton follow?

The Parish Church of All Saints is listed Grade II* (National Heritage List entry 1113722, first listed 31 October 1966) and is a Church of England church. For such a building in use, listed building consent gives way to "the faculty jurisdiction of the Church of England". The exemption takes the place of listed building consent and nothing wider, so a planning application for work to the outside may still be wanted, and Central Bedfordshire Council can advise on that point.

04What does listing mean for Campton Manor, The White Hart and Poste Cottage?

Campton Manor is Grade II* (National Heritage List entry 1137564, first listed 16 January 1952). The White Hart Public House is Grade II (entry 1113721, first listed 10 January 1985) and Poste Cottage is Grade II (entry 1321838). Permitted development rights for roof work remain, but listed building consent applies to works affecting character, so a covering change, a rooflight or new lead detailing is raised with the council before it is ordered, and a photograph of the existing roof helps.

05Conservation areas lie close to Campton: do they cover my house?

Wrest Park, Meppershall and Shefford are the conservation areas close to Campton. Being close tells you the village sits among them and nothing about any single Campton address. A phone call or email to Central Bedfordshire Council settles it for a given house. An Article 4 direction can remove further permitted development rights, so we check with the council first. The planning guide sets out the ordinary tests for a house, and the council covers the rest. For a house at the edge of the village, ask before assuming either way, because the answer changes what a covering, a rooflight or a dormer can do without an application.

06Does the VAT reverse charge apply to a roof job at a Campton pub?

For VAT-registered businesses working within the Construction Industry Scheme, building services can fall under the domestic reverse charge. The guidance says it "does not apply for supplies to end users", and an end user gives the supplier written confirmation of that status. A pub owner who is the end user can do that. A homeowner is outside the charge altogether. Whoever prepares the pub's VAT return can say how the rule applies, since the answer depends on the business's position.

07Is a scaffold licence needed for a house on a Campton road?

Where scaffolding obstructs a pavement or road, section 169 of the Highways Act 1980 requires a licence, and Central Bedfordshire Council acts as highway authority in Campton. We arrange the licence with our scaffolder. A scaffold that stays inside your boundary does not need one. Whatever scaffold the work calls for sits inside the written quote. A note of whether the house meets the road directly helps the survey, as does the width of any pavement in front, and a picture of the frontage.

08Does spray foam under a Campton roof affect a mortgage?

RICS reported in 2023 "concern within specific sectors of the lending market". Government guidance from October 2026 says "Many mortgage providers are open to lending on properties with spray foam, subject to their own requirements." Energy Saving Trust says foam "doesn't automatically prevent you from getting a mortgage, but some lenders may ask for extra checks". Removal "will not always guarantee that they will still lend", so talk to your lender and a specialist surveyor before deciding. Once foam covers the roof timbers they "cannot be fully seen or inspected", which is the point RICS makes about inspection.

09Which villages near Campton are on the same round?

The round takes in Shefford, Meppershall, Upper Gravenhurst, Clifton and Lower Stondon, and each page gives the council, the listings and the consent notes that fit its own place. If a postcode straddles two parishes, send it on WhatsApp to 07880 284133 and the reply says which page applies, along with the building control contact for that council. Photographs of the roof and the street frontage speed that up. Tell us whether the building is the manor, the pub or a house, since that changes which consent notes apply.

Get a written price for your roof

10-year workmanship guarantee, in writing

Tell us about your roof

Call WhatsApp Written quote