The short answer
A registered building control approver is a private business registered with the Building Safety Regulator to carry out building control in England, as an alternative to the council's own building control team. Registration began on 6 April 2024. Where a council would issue a completion certificate, the approver issues a final one.
Council team or registered approver
Building control checks that work meets the Building Regulations. It is carried out by the council's building control team or by a registered building control approver, and the person responsible for the work chooses between the two. A roofer, an architect or a householder can make that choice, so ask who is doing it on your job. If you are unsure which route your roofer has in mind, a short written question settles it.
GOV.UK sets out the registration rule in these words: "All private sector businesses that want to do building control work in England and Wales under the Building Act 1984 (as amended) must apply to register with the Building Safety Regulator (BSR)." Businesses that did this work under the earlier system were told to apply for the new register, so the rule reaches firms that were already active before the date.
| Route | Provider | End document |
|---|---|---|
| Council | The council's team | Completion certificate |
| Private | Registered approver | Final certificate |
Both routes apply the same Regulations to the same work. What differs is who inspects it, who charges for it and which certificate you receive at the end of the job. A householder can ask either provider for a written fee and a list of the inspections it expects, which makes the comparison straightforward.
What changed on 6 April 2024
The Building Safety Regulator's registration rules came into force on 6 April 2024, in a statutory instrument that states: "These Regulations come into force on 6th April 2024." Private building control did not begin on that date, because private firms were already doing the work under an earlier system. What began was the registration regime, which brings private providers under the Regulator.
For a householder the change amounts to a new name and a register to check. A firm offering to deal with building control for a roof job should be able to say whether it is the council's team or a registered approver, and a registered approver should be able to show its registration. If anyone describes themselves using the older title, ask for the registration detail in writing.
A registered approver's closing document is a final certificate, under section 51 of the Building Act 1984. The council's team gives a completion certificate under regulation 17 of the Building Regulations 2010. See the page on the completion certificate for what each document records and why a buyer may ask for it.
Choosing between the two
The Regulations do not rank the routes, so neither carries a higher standing in law. The choice comes down to practical matters. Some people prefer the council because it is the local authority and already knows the area. Others use a registered approver because the firm can offer a different fee structure or timetable. Neither is a shortcut: the same standard applies to the finished roof. Compare them on what you will actually receive: the inspections, the timing and the certificate.
Ask each provider what its fee covers, how many inspections it expects for a roof job, and what happens if the inspector finds a fault. Get the answers on paper before you commit, and keep them with the quote. Whichever route you pick, the work must still be inspected, so the roofer should leave access to the roof structure until the inspector has seen it. A provider that is vague about fees or inspections at this stage is unlikely to become clearer later, so treat vagueness as information.
To see which jobs involve building control at all, read the Building Regulations guide for roof work. The Daylight Roofing home page describes the survey that comes before a written price. If your job needs approval, ask the council's building control team or a registered approver which application suits it before work starts.

