01 Ridge and hip tiles
The ridge is the highest line on a roof and the hips are its sloping corners, and the tiles along them cap the joints where slopes meet. Marley's guidance is that "In all cases, ridge or hip tiles should be mechanically fixed to resist the calculated wind uplift force." BS 8612:2018 is the standard for ridge, hip and verge parts that are dry-fixed, meaning clipped and screwed in place rather than bedded.
From the ground, look for a ridge line that dips or kinks, a tile out of line with its neighbours, or a dark crack in the pointing beneath. Marley also notes that since the 2015 amendments to BS 5534, mortar "could no longer be relied upon as the only means of securing the roof covering". A ridge that was bedded in mortar alone is therefore worth a closer look, and a photograph taken with a zoom lens from the lawn gives a first idea of its condition.

