The short answer
A ceiling is wet after rain because water has got past the roof covering, a flashing, a gutter or a window seal and soaked the structure above it. A stain that shows only after rain implicates the roof, whereas one that shows in dry weather implicates condensation or a pipe.
Reading the pattern of the stain
The timing of a stain says more than its colour. Watch when it grows and when it stops, and write the dates down, along with the weather on each day. The table sets out the main patterns and the likely explanation for each.
| Pattern | Likely cause |
|---|---|
| Grows in rain, dries between showers | Water entering through the roof or gutters |
| Appears on cold mornings with mould specks | Condensation on a cold surface |
| Wet in dry weather, near a bathroom or tank | A leaking pipe or overflow |
| Brown ring that keeps its edge | Old water, dried and wetted again |
A stain that tracks the weather closely is the one to treat as a roof matter first. One with no link to rain needs a different kind of look, starting with the nearest pipes, tanks and cylinders. A ring with a hard brown edge shows that the area has been wet more than once, even when it looks dry today. Ringing the edge of the mark with a pencil and noting the date shows whether it is growing from one rainy day to the next. Two or three pencil lines make the pattern easy to see, and they give a roofer a record to work from.
How rain reaches the ceiling below
A ceiling is the last layer in a long line. Rain has to pass the covering, the underlay, the roof timbers, the insulation and the plasterboard before it shows. By the time a stain appears, water may have been moving through the roof for a while, soaking each layer in turn, which is why the first mark can seem sudden when the fault is not.
The entry point can be a slipped tile, a lifted flashing beside a chimney or wall, a worn valley, a failed roof window seal or a gutter that has overflowed behind the fascia. The stain on the plasterboard can be well away from the gap, since moisture can follow the line of a timber before it drips. A patch placed straight above the mark can miss the fault altogether. Insulation can hold water too, and it may stay damp well after the showers end, so a ceiling can stay marked on dry days.
Rain blown sideways reaches places that stay dry in a straight downpour, so a stain that appears only in a wind from one direction is a clue worth recording. The page on signs of a leaking roof describes the marks to look for, and the page on how to find a roof leak takes the checks in order.
What to check before calling anyone
Some checks need only your eyes. Look at the roof from the pavement or garden for slipped tiles, gaps at the ridge or a lifted edge beside a chimney. Look at the gutters for water spilling over the front or back during rain. Check the room above the stain for a bath, shower, toilet or radiator pipe that might be leaking. A torch shone along the loft side of the roof can show wet timber, but only where it can be reached from the loft hatch while keeping to the boards.
If the room above is a bathroom, run the shower or the tap for a few minutes in dry weather and watch the ceiling below. If it stays dry, plumbing is less likely. If the stain sits under a cold roof space, note whether it appears after a cold night without rain, which would suggest condensation instead of a leak.
Whatever you find, photograph the stain with the date, and keep the pictures. Sending one to 07880 284133 on WhatsApp lets us read the position before a survey, and the page on what to do if your roof is leaking covers the steps if water is coming through now. The roof repairs hub sets out what a repair can involve once the cause is known.

