Lifespan figures are approximate
A roof covering lasts as long as its materials, its fixings and the weather it meets allow, and nobody can read that from a date on a calendar. The figures below come from named sources, and each is quoted with its own wording. They are published estimates for coverings that were correctly installed, and they are not promises about any particular roof.
Marley, a tile maker, makes the point itself. Marley says "Typically, roof tiles are expected to last for around 60 years" and adds "This is not a guarantee or warranty of its longevity." That caution applies to every figure in this guide. Where two sources give different numbers for the same covering, both are shown and neither is treated as the right one.
The figures also describe a covering, not a roof. A roof is a system of covering, fixings, battens, underlay, flashings, ventilation and drainage, and the covering is only as long-lived as the parts holding it on and keeping water away from it. A tile that has years left can sit on battens that have not.
For a roof that is already installed, the useful question is not how old it is compared with a published figure, but what condition it is in now. A survey answers that, and the published lifespans give a reference point for the discussion. The roof replacement hub covers the choices once a covering is spent.
Clay and concrete tiles
Clay and concrete tiles carry figures of their own. Marley's life-expectancy page says "For clay roof tiles, the BRE determined a minimum life expectancy of 60 years", and that figure belongs to clay tiles only. HomeBuilding, on a page last updated on 30 September 2025, gives approximate lifespans of 60-80 years for clay tiles, and for plain concrete tiles its figure is 40-50 years.
| Covering | Source | Published figure |
|---|---|---|
| Clay tiles | HomeBuilding | 60-80 years |
| Plain concrete tiles | HomeBuilding | 40-50 years |
Marley's wording is for roof tiles in general, while HomeBuilding separates clay from plain concrete. Read as published estimates, they sit within the same broad region, and neither is a guarantee. A tile on a sound, well-fixed roof can still be doing its job when it passes the lower figure, and one on a failing roof can fall short of it.
A tiled roof's life is also affected by what holds the tiles on. Marley notes that since the 2015 amendments to BS 5534, mortar "could no longer be relied upon as the only means of securing the roof covering", so older ridge and verge work that relied on mortar alone is a place to look when a roof is surveyed. BS 5534 is a code of practice, and Marley's page states that installing to it "isn't required by law".
Natural slate
Natural slate has the longest published figures of the tiled and slated coverings in this guide. HomeBuilding's approximate lifespans are "100+ years" for Welsh slate, 75-100 years for Spanish natural slate and 50-80 years for reclaimed Welsh slate.
| Slate | HomeBuilding figure |
|---|---|
| Welsh slate | 100+ years |
| Spanish natural slate | 75-100 years |
| Reclaimed Welsh slate | 50-80 years |
Reclaimed slate is listed with a lower range than new Welsh slate, which makes sense for a material that has already spent decades on a roof. A reclaimed slate laid on a new roof starts from the condition it had when it came off, so its remaining life depends on how sound each piece is.
A slate can outlast the fixings that hold it. A slate roof that slips and loses slates can be a roof whose nails have corroded or whose battens have failed, and the stone itself is not the part that has run out. Reusing sound slates when a roof is re-laid is a decision made slate by slate, and the survey is where it is made.
The lifespans for slate assume the covering was laid and fixed correctly in the first place. A slate on a pitch too shallow for it, or fixed with the wrong fittings, is a different case from the one the published figures describe, and no table can say how a particular roof was built.
Flat roofs: EPDM, GRP, felt and lead
Flat roof coverings have two published sets of figures, and they differ. HomeBuilding's approximate lifespans are on a page last updated on 30 September 2025, and Less published its own figures on a page last updated on 12 November 2026.
| Covering | HomeBuilding | Less |
|---|---|---|
| EPDM | 25-30 years | 30 to 50 years |
| GRP | 25-30 years | 25 to 40 years |
| Felt | 10-15 years | 10 to 20 years |
| Lead | 60-100 years | 50 to 100 years |
Less gives felt "10 to 20 years depending on quality and installation", GRP "25 to 40 years with minimal maintenance" and says EPDM rubber membrane "typically lasts 30 to 50 years". HomeBuilding's figures are plain ranges without those conditions. The table keeps the numbers each source published.
The ranges are wide, and a flat roof's actual life depends on the quality of the work and on how well falls and drainage were set. BS 6229:2025 is the current standard for membrane flat roofs, and it sets a minimum finished fall of 1:80, so a membrane roof is built with drainage in mind.
A flat roof that holds water, or one with a membrane that has split along a seam, may be near the end of a covering's life even when its age sits inside a published range. The survey shows which.
Lead, zinc and roofline materials
Metals carry some of the longest figures, with the usual conditions attached. MyJobQuote's page last updated on 22 September 2026 says correctly installed lead flashing "can last for over 80 years". That sentence concerns lead flashing, and the conditional word "correctly" is part of it. The figure is a statement about what lead can do, not a minimum that any given flashing will reach.
Lead sheet is made to BS EN 12588 in codes 3 to 8. Code 4, for example, is 1.80 mm thick, and the specification for a job sets the code used for each detail. A thicker code is heavier and costs more, and the choice follows the position of the lead on the roof.
VMZinc, the maker, says "When correctly designed and installed a zinc roof can last in excess of 100 years." Again the condition belongs to the fact: the claim is about a roof that was correctly designed and installed, and about what it can do.
Roofline products are different. One uPVC retailer writes that its fascia boards "can typically maintain reliable performance for between 20 and 40 years" once installed correctly. That is a retailer's figure, and it covers boards, not roof coverings. Conservatory roofs have their own figures. HomeBuilding gives polycarbonate roofs "a typical lifespan of 10 years". Roofing Megastore's managing director, quoted by HomeBuilding, says a glass conservatory roof "will likely last in excess of 30 years" and a tiled one "will typically last in excess of 50 years with little maintenance being required".
What protects or shortens a roof's life
A few things measurably affect how long a covering performs, and most come from the sources already cited. Fixings come first. Under BS 5534 the standard's own minimums give way to a fixing specification written for the site, which allows for how exposed the roof is. Marley says "In all cases, ridge or hip tiles should be mechanically fixed to resist the calculated wind uplift force." A covering fixed to an older pattern may fail sooner at its edges.
Water management matters as much. Brett Martin gives a fall of "1mm for every 600mm" for guttering, running towards the outlet. A gutter that overflows or leaks can wet fascias, soffits and the top of the wall, and a roof edge that stays wet wears out earlier.
Ventilation matters under the covering. With a high-resistance underlay in a cold roof, Marley gives 25 mm of eaves ventilation at 15° or less and 10 mm above 15°. A loft that cannot breathe can let moisture build up in the roof timbers, which is bad for battens and rafters long before the covering is spent.
Cleaning needs care. Marley says "The use of high powered jet washes is not recommended as it can damage the surface of the slate or tile, thus reducing its expected life considerably." Moss or algae on a covering is worth having looked at before anything is sprayed on or washed off. Flashings and valleys wear separately from the covering around them. A lead flashing with decades of life in it still needs to be fixed and dressed properly, and a valley that has silted up can overflow into the roof.
Reading a lifespan against your roof
Set against a real roof, a published lifespan is a rough guide. A roof inside its range and sound needs nothing urgent. A roof that is inside its range but leaking, with slipped tiles on several slopes or soft battens, is already failing as a system. And a roof beyond a published figure can still be sound if its covering and fixings are in good condition.
Age tells you when to start paying attention, not when to replace. The signs that matter are in the roof: cracked and crumbling tiles, slates that slip, flashings lifting, a ridge that dips, damp in the loft. The guide to signs you need a new roof goes through them.
If a covering is close to the point of replacement, the choice of replacement comes next. The guide to roof covering options compares what is available, and new roof costs sets out published prices with their sources and dates.
Pictures sent over WhatsApp give an early look at the covering's state. The survey judges the underlay, battens and fixings as well, and the price is put in writing as a single figure, so the choice to replace or keep a roof rests on a proper reading of it.

