Call 01582 935272

Biggleswade · 25 road miles north-east

Roofers in Biggleswade

Biggleswade is 24.5 road miles from Dunstable, in the north-east, and takes about 42 minutes to reach by road. A visit to look at the roof precedes any price, and the figure that follows is one written total.

Get a written quote

Call 01582 935272WhatsApp us

Council
Central Bedfordshire
Road miles
25
Conservation area
Biggleswade
Building control
Central Bedfordshire

Roofs round Stratton House and the Red Lion

Biggleswade parish had 22,541 usual residents in the 2021 Census. The Church of St Andrew is listed Grade II* (National Heritage List entry 1321424, first listed 20 May 1952). Stratton House is listed Grade II (entry 1114480, first listed 20 May 1952), the Red Lion Public House is Grade II (entry 1312226, first listed 7 December 1978) and Brigham House is Grade II (entry 1137615). A ringwork and bailey castle, ring ditch and enclosures east of Brookland Farm is a scheduled monument (entry 1010115) near Biggleswade, in Old Warden parish.

Biggleswade Conservation Area is designated by Central Bedfordshire Council, which also decides planning applications for the town. The council says permitted development rights are stricter for properties within conservation areas, so a roof address in the centre is put to it first. Roof tests sit in the planning guide, with the work described on the flat roofing and commercial roofing pages.

  1. 01St Andrew's churchGrade II* and a Church of England church, so its roof goes through the faculty system, with planning for the exterior a separate matter.
  2. 02Stratton HouseGrade II listed (entry 1114480): a re-cover or a new roof opening is tested against the listing first.
  3. 03Red Lion Public HouseListed Grade II (entry 1312226), so roof work on the building needs listed building consent where character is touched.
  4. 04Brookland Farm castle siteA scheduled ringwork and bailey castle (entry 1010115): works at a scheduled monument must be authorised.
Concrete tiled estate rooftops towards green hills

The roof, in plain words

Abutment
The line where a roof edge butts against a vertical wall.
Kerb
The raised upstand that a rooflight or lantern is set on.
Dwellinghouse
A single home; planning law leaves a building containing flats out of the term.
Reverse charge
A VAT rule shifting the tax to the customer between registered businesses.

The plain-as-day roof check

Four roof checks across Biggleswade, from flats to lanterns

4 checks about 3 minutes to read

  1. Roofs on flats
  2. Zinc and other sheet metal
  3. Flat roofs against walls
  4. Lanterns and flat-roof rooflights

01 Roofs on flats

Flats are treated differently from houses in planning law. The permitted development order's word for a home is "dwellinghouse", and that term does not include a building containing flats, so householder permitted development rights do not reach a flat. A flat roof, or a pitched roof over flats, is therefore a question to put to Central Bedfordshire Council at the outset. Photograph the ceiling below the roof from inside the flat and date the pictures, so stains can be compared later and everyone on the building sees the same record.

Building regulations stay in play whatever the planning answer. The Planning Portal's test for a re-roof, "Less than 25 per cent of the total 'building envelope'" and "Less than 50 per cent of the roof is affected", applies to a block's roof as it does to a house. Where several owners share the roof, the repair has to be organised between them, and a roof survey gives everyone the same description of what has failed.

02 Zinc and other sheet metal

Zinc is laid as sheet, in seams, on a roof or a dormer cheek. VMZinc, its maker, says that "When correctly designed and installed a zinc roof can last in excess of 100 years." The wording is conditional: it describes zinc designed and fitted correctly, and that is the maker's own statement, not a promise about any building here. Standing on a metal roof to look at it can dent a seam, so the first look is taken from the ground or a ladder.

Lead is the other sheet metal that turns up on roofs, and BS EN 12588 rolled lead is made in codes 3 to 8, with code 4 at 1.80 mm thick. Metal roofs show their trouble at seams, folds and fixings: a seam that has opened, a stain running from a fold, a patch where a clip has pulled out. Each metal expands and contracts as it warms and cools, so the details at the edges are where a survey spends its time.

03 Flat roofs against walls

A flat roof on a shop extension, a rear addition or a garage ends at a wall on at least one side. That upturn is the abutment, and the membrane has to run up the wall and be sealed under a flashing or a capping. A seam that has parted at the corner, or sealant bridging a gap above the upturn, shows where water has been getting behind the covering.

BS 6229:2025 covers flat roofs with continuously supported flexible waterproof coverings. NFRC says it sets "a minimum 1:80 finished fall for general roof areas and internal gutters", and IKO says the code of practice has the roof designed for a fall of 1:40 to reach it. A roof that holds a pool at the wall end has a fall problem there, and no amount of sealant at the upturn will cure standing water. Look at the wall end from a ladder only if it is safe, and otherwise from a window, for a gap behind the capping, a membrane edge that has curled or a stain that begins at the corner.

04 Lanterns and flat-roof rooflights

A glazed lantern or a flat-roof skylight sits on a raised kerb. In Appendix A of Approved Document L, a rooflight is a glazed unit installed "out of plane with the surface of the roof on a kerb or upstand" and adds that it is "also sometimes referred to as a skylight". For a replacement rooflight, Table 4.2 of AD L 2021 gives 2.2 W/m²K.

Check the kerb for movement, the seal where glass meets frame for fogging, and the flashing round the base for gaps. A pane that mists between its sheets has lost its seal, while a stain on the ceiling directly beneath can trace back to the kerb joint. See skylights and roof windows for the difference between a rooflight on a kerb and a window in the slope. Where a lantern crowns an extension, the roof beneath it has its own ceiling and insulation, so the survey reads that build-up from inside as well, and the leak is traced to the glass, the kerb or the roof around it.

The dashed ring takes in the nearest towns and villages we cover around Biggleswade. Map tiles © Esri; map data © OpenStreetMap contributors.

Biggleswade: flats, a scheduled castle site and costs

01Why would a Biggleswade flat-roof extension leak at the wall?

The wall junction is the weak line of a flat roof. Water that runs down the wall meets the upturn of the membrane, and if the upturn is low, the capping has lifted or the sealant has cracked, it passes behind. Another route is a membrane that has shrunk away from the corner. The stain inside then appears at the ceiling edge nearest that wall. Look for staining along the ceiling edge nearest the wall, blistered paint and a damp smell in the corner. A photograph of the junction from the roof edge, or of the stain, sent on WhatsApp gets a first look, and the survey then reads the whole upstand.

02What difference does the Biggleswade conservation area make to a roof job?

Biggleswade Conservation Area is designated by Central Bedfordshire Council, and the council says that permitted development rights are stricter for properties within conservation areas. Whether an address is inside the boundary is for the council to confirm. An Article 4 direction can remove further permitted development rights, so we check with the council first. Listed buildings such as Stratton House follow their own rule, which is listed building consent for work affecting their character, and that applies inside the conservation area or outside it. The council's reply is worth keeping with the written price.

03Do St Andrew's and the castle site near Brookland Farm share one consent route?

No. St Andrew's is a Church of England church in use, so it sits under the faculty system and not listed building consent. The ringwork and bailey castle east of Brookland Farm is a scheduled monument, where works need authorisation, with the Secretary of State as the grantor of that consent and Historic England as the office where applications are lodged. A scheduled monument stays outside the listed building consent system. A house in the town has neither route and follows the usual planning and building rules, so each of the three cases has its own paperwork and its own first question.

04Can the owner of a flat in Biggleswade use householder planning rights?

No. Under the General Permitted Development Order, a dwellinghouse does not include a building containing flats, so the householder rights for roof work do not apply to a flat. That makes a roof window, a re-covering or other change to the roof above a flat a question for Central Bedfordshire Council. Building regulations apply separately, using the same Planning Portal test as for a house, and a listed or conservation-area address adds a further layer. A lease or tenancy agreement may say more about who can alter a roof, so read it before planning any change.

05What do guides say a flat or garage roof costs around Biggleswade?

MyJobQuote's page of 20 October 2026 says the average flat roof replacement costs between £1,500 and £6,000 in 2026. Its garage roof page of 26 October 2026 puts the average garage roof replacement between £750 and £3,500, and its rubber roofing page of 9 October 2026 says rubber at around £60 per square metre means the average rubber roof costs £1,050 fully installed. Those are three third-party figures for different jobs. Your written total follows the survey and rests on the deck, the access and the roof's size, which no guide can see.

06What does the highway licence cover when scaffold stands on a Biggleswade street?

Under section 169 of the Highways Act 1980, a scaffold taking up part of the footway or road needs a licence from Central Bedfordshire Council, the highway authority for the town. We arrange the licence with our scaffolder. In a town centre the pavement is busy and the kerb may carry parking, so the position of the poles is raised when the price is requested. Parked cars are one reason a scaffold may have to be moved from its first planned place. It affects how the roof is reached as well as how long the boards stay up.

07Does the VAT reverse charge touch a landlord's roof job in Biggleswade?

The domestic reverse charge covers supplies reported through the Construction Industry Scheme, and works between VAT-registered businesses. In GOV.UK's technical guide it "does not apply for supplies to end users": customers who have given the supplier written notice that they are end users. A landlord letting out flats may or may not be an end user, so the position is for the landlord's accountant or HMRC. The answer turns on what the customer has told the supplier in writing, so ask your accountant or HMRC about that point.

08Could a Biggleswade household get a grant towards a roof?

No scheme is listed that pays for replacing or repairing a roof; the government schemes cover insulation and heating. ECO is closing on 31 December 2026, and Ofgem lists the Great British Insulation Scheme as ended for new installations. The Warm Homes: Local Grant asks for an Energy Performance Certificate of D to G and a household income that is usually £36,000 a year or less, and Central Bedfordshire appears on GOV.UK's list with £1,000,000. How the council runs it is a question for the council.

09Who can a Biggleswade householder turn to over a roofing dispute?

Section 49 of the Consumer Rights Act 2015 is headed "Service to be performed with reasonable care and skill". The Citizens Advice consumer helpline is 0808 223 1133. Citizens Advice can also explain what a Biggleswade owner should send to the firm first. A written total and a dated copy of any contract give the helpline something to work from, so keep both. If the dispute is about the work itself and not a contract term, a dated photograph of the roof before and after any repair is the strongest thing to bring.

Get a written price for your roof

10-year workmanship guarantee, in writing

Tell us about your roof

Call WhatsApp Written quote