01 Sheet laps and fixings
A profiled sheet roof sheds water because each sheet overlaps the next, so the laps and the fixings are what keep it dry. Look for laps that have opened at the end, sheets that have lifted at a fixing, screws with a stain or rust halo around them, and sealant that has cracked or pulled away. A leak at a fixing can travel a long way along the underside of a sheet before it drips, so the stain inside may sit far from the cause. Moss, bird droppings and dirt along a lap hold water against the joint, and they are worth clearing before sealant is judged.
The roof itself carries wind loads, and fixings are calculated for the site's exposure, with ridge and hip pieces mechanically fixed to resist the calculated wind uplift force. For a large sheeted roof a survey looks at a sample of fixings across the whole area, and at the sheets' ends, where the laps and end fixings sit. If the building is old enough that sheets may contain asbestos cement, have them identified by a specialist surveyor before anyone drills or cuts them; that is specialist work to arrange separately. A roof that has been re-fixed at some point may carry two different kinds of screw, which shows where an earlier repair was made.

