The short answer
A survey before a re-roof looks at the whole roof: the covering, ridge and hip tiles, verges, valleys, flashings, chimney, fascias and gutters, plus any signs from inside the loft. Battens and underlay sit beneath the covering and can be judged properly only when it comes off. One written total price follows the survey.
From the ground to the ridge
The outside of the roof gives a surveyor most of a roof's story in a short time. Each slope is read tile by tile for slips, cracks, flaking faces and gaps. The ridge and hips are checked for loose or cracked tiles and for the way they are fixed. The verges, where the roof meets the gable wall, are checked for broken bedding and tiles that have worked loose.
- The covering: slipped, split or worn tiles, moss that is holding water, and patches that have been repaired before.
- The ridge, hips and verges: fixing and condition.
- Valleys and flashings: lead or mortar where the roof meets a wall or chimney.
- The chimney: stack, pots, flaunching and the flashing around the base.
- The roofline: fascias, soffits and gutters, including falls and joints.
The pitch is measured because it decides which coverings can be used, and the size of each slope is measured too, since it sets the scale of the work. A roof on a house built or refurbished before 2000 is treated with care for asbestos, in line with HSE's advice, particularly where there is cement sheeting or board under the eaves.
What shows only under the covering
Underlay and battens are laid beneath the tiles, so a survey from outside cannot give a final verdict on them. Clues show: tiles that rock, a ridge that sags, or a slope that has gone wavy can point to battens that have rotted or rafters that have moved. The signs you need a new roof page lists the clues in more detail.
In a full re-roof the battens and underlay are exposed as the tiles come off, which is when their true state is read. Timber that has rotted is found at that point, and a survey from the ground cannot show it. For that reason it is worth asking any firm what its written quote covers and what happens if timber turns out to be worse than it looked.
A stand-alone roof survey is a separate product from the survey that goes before a quote. MyJobQuote gives an average of around £300 for a roof survey, on a page dated 12 October 2026. The survey that comes before a quote leads to one written total, with the job set out in plain words.
Looking from the loft hatch yourself
You can gather clues before anyone climbs a ladder. After rain, put a torch through the loft hatch and run the beam along the rafters and the boards or felt between them. Look for pinpricks of light where the roof should be dark, damp patches or dark staining on the timber, drips at the chimney breast, and rafters that dip or bow.
Stay on the joists or the boards and never put your weight on the ceiling between them. If the loft is not boarded and you are not sure, look from the hatch only.
Outside, a pair of binoculars shows missing or slipped tiles, a crooked ridge and gutters that have come adrift. Do not climb onto a pitched roof, and do not go onto an old cement sheet roof at all, because a cement roof does not take weight and breaks underfoot.
Take photos and send them on WhatsApp to 07880 284133 first, as we look at a photo you send. Or call 01582 935272. The roof replacement page explains the full job after the survey has been carried out, and the new roof costs page covers how prices are reached.

