The short answer
Partly. A sash or pane may come out from inside on some models, but the frame and the flashing that seals it to the roof covering are reached from the outside. Whether scaffolding is needed depends on the height of the roof and how the slope can be reached, so each window is judged on its own.
What the inside of the room can offer
A roof window is made of a moving part, the sash, set in a fixed frame that is built into the slope. On some models the sash or its glazing can be lifted out and replaced from the room side. The trims, the lining and the blind around the unit are also reached from inside, and they come off and go back on there. A job limited to those parts may need no ladder on the roof at all.
That changes when the frame itself is being replaced. A frame is fixed to the rafters and sealed to the surrounding covering with flashing, so removing it disturbs the tiles or slates around it, and those can only be reached from the slope. A new unit of the same size as the old one fits the existing opening, which keeps the work between the same rafters and avoids cutting the structure.
The maker's instructions for the particular model are the reference point for what can be done from the room. The model code is printed on a label on the unit, and a photograph of it helps to identify the window before any method is chosen.
Reach is a practical limit on the inside work. A window high in a steep ceiling can sit well above the floor, and working on it may need a platform or tower in the room, so the height of the lower edge and the clear floor space beneath are worth noting before a method is chosen.
Why the outside still matters
Flashing is the metal or purpose-made trim that closes the gap where frame meets covering, steering water over the joint and onto the tiles or slates below. A new frame needs flashing that suits it and suits the covering around it, and a flashing kit is made for each combination of unit and covering. That joint is the weather seal of the whole job, and it is made on the slope.
| Part of the job | Reached from |
|---|---|
| Sash or glazing | The room, on some models |
| Frame | The slope |
| Flashing | The slope |
| Covering around the frame | The slope |
| Lining and trims | The room |
Ladders on the slope, scaffold towers and full scaffolds each have a place, and the choice follows the height of the eaves, the pitch of the roof and what lies below. Section 169 of the Highways Act 1980 gives the highway authority the licensing of scaffolding on a pavement or road, so we arrange the licence with our scaffolder. Whatever scaffold the job needs is priced inside the written quote, which stays a single figure.
Choosing the method for your window
The simplest case is a like-for-like unit in the existing opening. MyJobQuote's Velux window guide, dated 22 September 2026, gives £1,100 as the average across mid-range Velux windows in the usual sizes, and adds that replacement costs "around £100 less for a straightforward swap, as the opening is already in place". Averages like these come from other people's jobs. A survey of your own roof fixes the figure that applies, and it arrives as one total in writing.
The replacement unit is held to Approved Document L. AD L 2021 lists 1.4 W/m²K against a replacement roof window, with the Window Energy Rating route as the other option, and building control can say how a given unit shows it. The page on roof windows and building regulations covers the tables.
A photograph of the window from inside and another of the roof around it can go to WhatsApp on 07880 284133. For help deciding between mending and changing a unit, see repair or replace a roof window, and for sourced prices see roof window and skylight costs. The main skylights and roof windows page lists the related work.

