The short answer
A conservation rooflight is a slim-framed glazed unit that sits flush with the surrounding roof covering, designed for older and heritage buildings. Despite the name, Approved Document L treats a flush unit in a slope as a roof window, so it needs 1.4 or Window Energy Rating Band B minimum, not the 2.2 given to a rooflight.
What makes a rooflight a conservation one
The name describes a style of unit more than a legal category. A conservation rooflight has a slim frame and sits flush with the roof around it, so little of the unit stands proud of the tiles or slates. That keeps the slope looking like a roof first and a window second, which is why the style gets chosen for older houses, outbuildings and buildings with heritage status.
A slim, flush unit can look very different from the bulkier frame of a standard roof window, though both are glazed units set into the slope. Nothing in the planning rules makes a slim unit acceptable automatically, whatever its style. Whether the council accepts a particular unit on a particular roof is decided case by case.
Fitting one is a roofing job as much as a glazing one. The opening is cut between the rafters, the frame is fixed, and the covering is dressed up to it with flashings that suit the tiles or slates. The look of the finished roof depends as much on that edge detail as on the glass, so the survey takes in the covering, the rafters and the position of the opening before a price goes in writing.
For the same reason, the style is not a fit for every roof. A covering that is badly worn around the opening, or rafters that cannot take a new frame without repair, change what the job involves. The survey says so plainly.
Why Part L files it as a roof window
Approved Document L settles the question by how the unit sits, not by what the brochure calls it. Appendix A gives the definitions. A rooflight is "A glazed unit installed out of plane with the surface of the roof on a kerb or upstand." A roof window is "A window installed in the same orientation as, and in plane with, the surrounding roof." A conservation rooflight is flush, so it falls on the roof window side of that line.
That matters for the figure. Table 4.2 in the 2021 edition gives a rooflight 2.2, and a roof window 1.4 or Window Energy Rating Band B minimum. A flush conservation unit has to reach the roof window figure. Reading the rooflight row as its target would be a mistake, because the 2.2 row belongs to units standing on a kerb or upstand.
| Unit | AD L name | Table 4.2 figure |
|---|---|---|
| Flush conservation unit | Roof window | 1.4 or Band B minimum |
| Standard roof window in a slope | Roof window | 1.4 or Band B minimum |
| Dome or lantern standing on a kerb | Rooflight | 2.2 |
The page on rooflight versus roof window puts the two definitions side by side.
Consents for an older or listed roof
Installing roof windows falls under Class C of the householder permitted development rights, and Class C has no exclusion for conservation areas or National Landscapes. What can change the position is an Article 4 direction, which removes some permitted development rights across a defined area, or listed status. A conservation rooflight in a conservation area therefore still needs the council's view on whether an Article 4 direction applies, and we check that with the council before work starts.
On a listed building the test is different. Listed building law asks for consent where work is carried out "in any manner which would affect its character as a building of special architectural or historic interest". A flush unit is far less obtrusive than a standard one, yet the council's conservation team decides how a particular roof is affected. Exterior work may separately meet the usual planning tests.
On a side slope, obscure glazing applies to every style of unit, and flats have no householder permitted development rights at all. The guide to roof windows in conservation areas goes into the heritage side, and the skylights and roof windows page lists the other work that sits around a window.

