The short answer
A sun tunnel is a daylight device made of a small dome on the roof, a reflective tube running down through the roof space and a diffuser set into the ceiling below. It lights a room with no outside wall or space for a window. The roof end is a small opening that has to be flashed and sealed.
The parts of a sun tunnel
A sun tunnel is built from four parts, and designs differ between makers, so the details below describe the general arrangement rather than any one product:
- a clear dome on the roof, which gathers daylight
- a flashing or base that joins the dome to the roof covering
- a tube with a reflective lining, running from the roof down to the ceiling
- a diffuser in the ceiling, which spreads the light into the room
Daylight enters through the dome and bounces down the tube. Where the roof void is deep, the tube may be rigid or flexible, and it may run straight or with a bend, depending on how far the roof opening sits from the ceiling opening. The room is lit without a window, which is why the device suits spaces that cannot have one: a landing, a hallway, a bathroom or a utility room in the middle of a house.
None of this needs the width of a standard roof window. The opening on the roof is small and round, so a sun tunnel can go between rafters in many layouts, with less structural work than a window that needs a larger opening. How far that is true depends on the roof, which is something the survey looks at.
Where a sun tunnel fits, and where a window does
A sun tunnel gives light without a view and without opening. A roof window gives light, a view out of the room and, on some models, a vent. Which one suits a room comes down to what the room needs. In a dark internal space where a window will not fit, the tunnel can be the neater answer. In a loft room that someone sleeps or works in, a window is the more usual choice, because a view and ventilation count there.
| Point | Sun tunnel | Roof window |
|---|---|---|
| View out | None | Yes |
| Roof opening | Small and round | Larger and square |
| Light reaches the room through | A tube and diffuser | The glazing itself |
| Escape route from a loft room | Not an escape window | Can serve, if it meets AD B para 2.10 |
A tube also needs a clear run through the roof space. Pipes, wiring, insulation and the roof's own timbers can all sit in the way, and a long run or a tight bend can reduce how much light arrives. A survey of the loft shows what is in the path before a position is chosen. The page on rooflights and roof windows sets out how the two main glazed units differ.
The roof side, and the rules to check
The dome is the one part that sits in the weather, so the roof end carries the risk. The hole is cut through tiles or slates, battens and underlay, and the base is flashed into the covering around it. A flashing that does not suit the covering's profile, or a seal that has hardened, is where a sun tunnel can start to leak. Repair, when it is needed, is roofing work, and the flashing and the covering are examined together at the survey.
Rules apply as they do to any alteration to a roof. Roof lights sit within Class C of the householder permitted development rights, and flats have no householder permitted development rights at all. On a listed house, listed building consent covers anything done "in any manner which would affect its character as a building of special architectural or historic interest", and an Article 4 direction can take rights away in a particular area, so we check with the council first.
Approved Document L sorts glazed units by how they sit against the roof: out of plane on a kerb or upstand, or in plane with the surrounding roof. Which of those two descriptions fits a given sun tunnel unit depends on its design, so the building control team is the place to settle which row of Table 4.2 applies. The page on roof windows and Building Regulations explains the two rows, and the skylights and roof windows hub lists the units we fit.

