01 Lead at walls and valleys
Where a roof runs into a wall, lead seals the joint. Walk round the outside and look at any grey metal strip: is it lying flat, or curling away from the brickwork? Are the folds cracked, and is there a stain below it? Lead patched with mastic shows that someone has already had to chase a leak at that spot, and a patch that has itself cracked means the original cause was never cured, and a photograph sent to 07880 284133 lets us look at it before any visit.
MyJobQuote says "When correctly installed, lead flashing can last for over 80 years (over 100 years for higher codes) with minimal maintenance." Rolled lead sheet is made to BS EN 12588 in codes 3 to 8, and code 4 is 1.80 mm thick. Weights differ by maker: Calder and Ecobat both list 20.41 kg/m² for code 4, while for code 6 they give 30.05 and 30.10. The specification decides the code detail by detail, so a valley and a flashing on the same roof can differ. Thicker lead is not automatically the right choice, because the detail it has to form also matters.

