01 The pitch of the slope
Water sheds from a roof only if the slope is steep enough for the covering laid on it. A roof that falls short gives rain a way under the overlaps, and no amount of patching cures an angle that is wrong from the start, whatever the tiles are made of. A phone app propped on a rafter in the roof space reads the pitch in degrees. Marley publishes a figure for each tile: clay Ashdowne at 35 degrees, clay Lincoln pantile at 15, concrete Mendip at 15 and Double Roman at 22.5.
Marley's "Canterbury", "Anglia" and "Ludlow" label products, so none of them points to a town. For natural slate, Cupa reports that BS 5534 "indicates" a 20 degree minimum at moderate exposure, using a slate 500 mm long with a 115 mm overlap; hook fixings, it adds, are not for pitches below 25 degrees. A re-cover that changes the tile therefore starts from the slope that exists, and the figure for the new covering has to fit it. Where it cannot, the survey says so before any price is written. A loft hatch, a torch and a spirit level on the rafter are all it takes to make a first reading, and a picture of the level's bubble sent through WhatsApp is seen before a visit.

