Call 01582 935272

Chimney repairs

What does rebuilding a chimney stack involve?

A rebuild takes the stack down to sound brickwork and builds it up again, with new lead, mortar and pots. It is the answer when repointing and patching can no longer hold the brickwork.

Get a written quote

Call 01582 935272WhatsApp us

A stack of new clay plain tiles on a scaffold board
PicturedA stack of new clay plain tiles on a scaffold board.

The short answer

Rebuilding a chimney stack means dismantling it down to sound brickwork and building it up again course by course, then refitting flashings, flaunching and pots. It is chosen where the bricks are loose, soft or out of line and repointing would not hold. Our survey comes first.

A roof drawing with its parts named: pots, flaunching, step flashing, apronPotsFlaunchingStep flashingApron

When a stack is rebuilt and not repaired

A repair treats a fault in brickwork that is basically sound. A rebuild is for a stack where the brickwork itself has gone. The stack is taken down to the level where bricks and mortar can be trusted, then built up again from there to its old height and shape, so the finished stack looks as it did but stands on sound material.

  • Bricks that are soft, flaking or have lost their faces.
  • A stack that leans, or has bowed between the roof and the pots.
  • Cracks that run through several courses, or open joints through the full depth.
  • Courses that move when pressed, so they cannot be repointed.
  • Joints that wear out again soon after repointing.

Leaning is the sign that moves a stack from the repair list to the rebuild list, because a stack that is out of plumb and loose at its base is a danger in a gale. Which route fits a particular stack is set out in the repair, rebuild or remove guide, and the whole range of stack work is under chimney repairs. Photographs from the ground, binoculars or a loft look can show a lean before a crack appears.

What the rebuild involves, stage by stage

  1. Safe access is set up around the stack, with scaffolding and a platform at the top.
  2. Pots, cowls and the capping are lifted off, and sound ones are kept for refitting.
  3. The brickwork is taken down course by course until sound material is reached.
  4. Sound bricks are cleaned and reused, and damaged ones are replaced with a matching brick.
  5. The stack is rebuilt in fresh mortar, held true with a line and a level, with flues kept clear.
  6. Lead flashings and a back gutter are fitted where the stack meets the tiles.
  7. The capping or flaunching is laid and the pots are set back in place.

Matching the old brick is part of the work, since a stack in an odd new colour stands out on the roofline. Bricks reclaimed from the dismantled stack keep the look, and where more are needed a close match is sourced. A conservation area or a listed home can call for a finish that copies the old, and the council is the body to ask before work starts.

The flues are not blocked by the work. Brickwork goes up around any existing flue liners, so that smoke still has a clear way out after the rebuild, and the pots are set on top of the finished stack and bedded in mortar.

Access, rules and what the job costs

Scaffolding on the pavement or road needs a scaffold licence from the highway authority; we arrange the licence with our scaffolder. A rebuild keeps the scaffold up for longer than a repointing job does, so the licence period needs to suit the work.

Rules sit alongside the brickwork. Class C of the permitted development rules for house roofs excludes "the installation, alteration or replacement of a chimney, flue or soil and vent pipe", so a rebuild that changes the stack's size, height or position is a question for the local council. The planning permission and chimney removal guide goes through the route.

A single written total follows the survey. The MyJobQuote figures in the chimney repair costs guide cover removal and chimney lead, so none of them stands as a rebuild price. A rebuild varies with the stack's height, its access and the number of courses that come down, and it is the survey that settles all three. The depth of sound brickwork cannot be seen until the stack is opened, which is why the survey looks closely at its upper courses, its leaning and its joints.

Rebuilding a stack, question by question

01Does a rebuilt stack look the same as the old one?

It can. The same bricks are reused where they are sound, new ones are matched to them, and the stack is built to its old height and profile with the pots refitted. A close match is the aim, because a stack of a different colour or size shows against the roof. Say so if the house is listed or sits in a conservation area.

02Do I have to rebuild the whole stack?

Not necessarily. If the brickwork is sound below a certain level, only the upper courses come down, and the lower ones stay. The survey finds that level by checking the bricks and the joints down the stack. A partial rebuild means less to dismantle, though the survey decides what is safe to keep. Cracks that run into the loft section point to a deeper rebuild.

03Can a rebuild be done in bad weather?

Mortar needs dry, mild spells to set well, and wind and rain make work at the top of a stack unsafe. That decides when the work begins, and it can pause part way through. Ask what will cover the opening if rain is forecast, since an open stack lets water straight down into the flues. The answer is worth having before a date is agreed.

04What if my stack is shared with next door?

Then the Party Wall etc. Act 1996 may apply, and the neighbour's flues may run through the same brickwork, so any work needs to protect them. Speak to the neighbour early, and ask a party wall surveyor if the work could touch the party structure. For a roof survey of a shared stack, call 01582 935272. Tell the neighbour what is planned before any scaffold goes up.

Get a written price for your roof

10-year workmanship guarantee, in writing

Tell us about your roof

Call WhatsApp Written quote