Call 01582 935272

Flat roof costs

Flat roof replacement costs

No two flat roofs cost the same to replace, so this guide sets out the dated ranges that other publishers give, what pushes a price up or down and what to check in any written quote. It belongs to our flat roofing pages.

9 minute read

Get a written quote

Call 01582 935272WhatsApp us

Row of flat-roofed brick lock-up garages with worn felt
PicturedRow of flat-roofed brick lock-up garages with worn felt.
A roof drawing with its parts named: lantern, rubber deck, outlet, lead flashingLanternRubber deckOutletLead flashing

What a replacement takes in

Replacing a flat roof means stripping the old waterproof covering and laying a new one onto a deck that has been looked over. The work starts with the old layers coming away, and then the boards beneath are inspected for damp, softness and movement. Any board that has gone is cut out and replaced before the new covering is laid, because a new membrane can be no sounder than the surface under it.

Then comes the covering itself, whether felt, EPDM rubber or GRP, followed by the details that keep the roof watertight where it ends: upstands against walls, flashings, drips along the edge and the outlets that drain it. A roof of a few square metres still has every one of those details, so a small roof is not simply a cheap one.

A replacement can also change what lies under the covering. Where insulation goes in, the build-up gets deeper, and the upstands and edges have to rise to match. That is one reason a quote needs a survey first: the sound deck under one roof can be a rotted deck under the next, and nobody can see which from the ground.

Our guide on whether to repair or replace a flat roof covers the decision that comes before this one. After the survey, you get a single written figure for the roof. The old covering is not guessed at from a description, because the layers under it can differ from what the surface suggests, and the boards beneath show their condition only once the covering is lifted.

Published ranges, side by side

Three published sources give flat roof prices, each with its own basis. Which? Trusted Traders based theirs on a survey of 11 of its Trusted Traders in November 2025, with labour and materials included and VAT excluded. MyJobQuote gives no VAT basis for its figures, and each of its pages carries its own last-updated date.

Flat roof figures from published sources
SourceJobFigure
Which? Trusted Traders, Nov 2025Felt roof on a single garage, 6m x 3m£1,400 to £3,500
Which? Trusted Traders, Nov 2025Rubber (EPDM) roof with new boards, same garage£1,950 to £4,000
MyJobQuote, 20 Oct 2026Flat roof replacement, 2026 average£1,500 to £6,000

The ranges are wide because they cover many different roofs. A figure for a 6m x 3m garage says nothing about an extension roof twice that size, and a national average mixes small and large jobs, simple and awkward ones. Treat each as a way to check that a written quote is in a sensible region, never as a price for your own roof. Read the date as well as the figure: a range gathered in November 2025 and one dated October 2026 describe different months of pricing.

None of these is our price. Each is another publisher's survey result, quoted with its date, and they cannot be joined into a single range.

The Which? garage figures

Which? Trusted Traders priced two garage roofs: felt at £1,400 to £3,500, and a rubber roof with new boards at £1,950 to £4,000. Both were for a single garage measuring 6m x 3m, and both exclude VAT. The EPDM line includes new boards, which tells you that the deck was part of what was priced. It was a survey of 11 traders, a small number, so the ranges show what those traders gave and nothing wider.

That detail matters when a quote is read. A figure for a covering laid over the old deck and a figure that includes new boards are not describing the same job. Where a quote does not mention the deck, it is worth asking whether it has been allowed for, because the boards are found out only once the old covering is up. Which? also says its prices exclude VAT, so a quote that adds VAT at the end only lines up with its ranges once the VAT is taken off again.

The two ranges overlap, which says that the choice of covering does not alone settle a price. Felt, EPDM and GRP each have their own build and their own lifespan figures, and our guide on how long a flat roof lasts sets those out with their sources named.

  • felt: £1,400 to £3,500 for the 6m x 3m garage
  • rubber EPDM with new boards: £1,950 to £4,000
  • both excluding VAT, November 2025

The MyJobQuote figures

MyJobQuote's page on flat roof costs says that in 2026 the average flat roof replacement costs between £1,500 and £6,000. Its separate page on rubber roofing puts typical rubber roofing prices at around £60 per square metre, and states that the average rubber roof costs £1,050 fully installed.

That per-square-metre figure is a unit price and the £1,050 is the page's own total. The two are shown together because MyJobQuote printed them together. A unit price is not turned into a total for any other roof by multiplying it by an area, because the rest of the job, from the deck to the edge details, does not scale along with the area.

MyJobQuote's garage page gives the average cost of replacing a garage roof as between £750 and £3,500 in 2026. A garage roof is a flat roof, and that range shows how far the figures spread even for one small building. The words average and around are MyJobQuote's own, so a roof can cost less or more than the figures quoted.

The three MyJobQuote pages are dated 9, 20 and 26 October 2026, and none carries a VAT basis. Where a roofing quote states its VAT treatment plainly, you can compare it fairly; where it does not, ask.

What moves the price of one roof

The published ranges are wide because the cost of a flat roof depends on the roof. Several things move it, and a survey shows them better than a photograph can.

  • the area of the roof, and its shape
  • the covering chosen: felt, EPDM or GRP
  • the state of the deck, and whether boards need replacing
  • how the roof is reached, and what has to be protected below
  • the number of upstands, corners, outlets and rooflights
  • whether insulation is being added or upgraded

Access is easy to overlook. A roof at the back of a terrace, reached only through the house, takes more handling than a garage roof that can be reached from the drive. Scaffold belongs inside the written quote where a job calls for it. Where scaffolding would stand on a public footway or a road, we arrange the licence with our scaffolder.

Details add up. Every outlet, every corner and every metre of upstand needs its own finishing. A roof with a rooflight in it has a kerb to dress, and a roof against a taller wall has more flashing to fit. Two roofs of the same area can therefore be priced differently once the survey has counted what is on them. A flat roof the size of a garage, reached from the drive, is a different job from the same area over a first-floor extension, and the quote must reflect that.

Insulation and the Building Regulations question

Under Approved Document L, a flat roof that gets a new waterproof covering is being renovated. Para 11.3 bites once renovation passes 50% of the roof's surface, after which the whole roof is expected to reach the Table 4.3 standard where that is feasible. The table gives a threshold of 0.35 W/m²K and an improved 0.16 W/m²K.

In practice, a replacement can mean adding insulation in the build-up of the roof. Where a full upgrade proves not feasible, or would not repay itself in 15 years, the work goes as far as that payback allows. The insulation question therefore belongs in a replacement price, and it is a topic for the survey to settle, since the depth of the existing build-up and the height of the upstands both limit what can be added.

A full replacement also takes in more than half the roof, past the Planning Portal's roof threshold, so Building Regulations approval comes into it. A flat roof with a rooflight in it adds a second question: a rooflight is a glazed unit standing proud on a kerb, and AD L 2021 allows 2.2 W/m²K for a replacement one. Building control is done by the council's building control team or by a registered building control approver. Our guide to flat roof Building Regulations walks through the rules in full.

Reading a written quote

A good quote names the roof it covers, the covering to be fitted and what happens to the deck. It states one total for the whole job. It gives a way to reach the business: phone, email and a name. What we give is one written total, after surveying your roof.

When two quotes for the same roof come in at different totals, check that they describe the same job before comparing numbers. Does each cover the whole roof or part of it? Is the deck included? Do both fit the same covering? Is scaffold covered? Which VAT treatment applies? A gap between totals can come from a difference in what the quote includes, not from a difference in how the work is priced.

  • the part of the roof the quote covers, named
  • the covering to be fitted
  • what the quote says about the deck beneath
  • whether scaffold and waste removal are covered
  • how VAT is treated
  • who to contact about the job

A price over the phone, given without anyone seeing the roof, is a guess. A photograph on WhatsApp to 07880 284133 lets us see the roof first, and the survey that follows turns it into a written total.

Questions about what a new flat roof costs

01What will a new flat roof cost me?

MyJobQuote says that in 2026 the average flat roof replacement costs between £1,500 and £6,000, on a page last updated on 20 October 2026. Which? Trusted Traders put a felt roof on a single 6m x 3m garage at £1,400 to £3,500 excluding VAT in November 2025. Your own roof has to be surveyed before any figure can be given for it, and we then give one written total covering the job.

02Is felt cheaper than EPDM rubber for a flat roof?

For a single 6m x 3m garage, Which? Trusted Traders gave £1,400 to £3,500 for felt and £1,950 to £4,000 for a rubber EPDM roof laid on new boards, both figures excluding VAT, from a survey of 11 traders in November 2025. The two ranges overlap, and the EPDM figure includes new boards, so they do not describe identical jobs. Neither is a quote for another roof.

03Can I work out my price by multiplying a per-square-metre rate?

A per-square-metre rate is a published unit price and not a quote. MyJobQuote's page gives around £60 per square metre for rubber roofing and its own total of £1,050 fully installed, and the total is the page's own, not a sum to repeat on another roof. Edge details, the deck and access do not scale with area, so a unit price tells you the shape of a figure and cannot replace a survey.

04Does a new flat roof need Building Regulations approval?

Approval is part of the route, because a full replacement goes beyond the Portal's 50 per cent roof threshold, whatever share of the building envelope it touches. Approved Document L counts a flat roof's new waterproof covering as renovation, and past 50% of the surface the whole roof is expected to meet the Table 4.3 standard where that is feasible. Building control is the council's team or a registered building control approver.

05Why do two quotes for the same flat roof differ?

Check that both quotes cover the same area, the same covering and the same treatment of the deck, and that each says how scaffold, waste and VAT are handled. A quote that leaves out the boards beneath can look lower and then change once the old covering is up. Ask, too, whether the roof was surveyed at all or priced from a description, and what the quote says will happen if the deck proves worse than it looked. Ours is one written total, given after we have surveyed the roof.

Get a written price for your roof

10-year workmanship guarantee, in writing

Tell us about your roof

Call WhatsApp Written quote