The short answer
MyJobQuote gives typical rubber roofing prices of around £60 per square metre, and its own average of £1,050 for a rubber roof. Which? Trusted Traders give £1,950 to £4,000 for a rubber (EPDM) garage roof with new boards, VAT excluded. These are third-party figures, not our prices.
What published guides say a rubber roof costs
Rubber roofing is EPDM, a synthetic rubber membrane laid in one sheet over a flat roof. Two published guides give figures for it, and they measure different things, so they are set out separately in the table. Each row carries its own source and date, and no figure here has been combined with another. The Which? basis is a survey of 11 Which? Trusted Traders, gathered in November 2025, for work on a single garage of 6m x 3m. The prices take in labour and materials, VAT is not counted, and the £1,950 to £4,000 range is for a rubber EPDM roof, boards renewed.
| Source | Figure as published | Basis |
|---|---|---|
| MyJobQuote, 9 October 2026 | Around £60 per square metre | Typical rubber roofing price |
| MyJobQuote, 9 October 2026 | £1,050 for the average rubber roof | Its own average, fully installed |
| Which? Trusted Traders, November 2025 | £1,950 to £4,000 | Rubber EPDM roof, new boards, single garage |
A per-square-metre rate is not a quote. It says nothing about the deck, the access, the edges or what the roof needs beneath the membrane, and nobody should multiply it by their roof area to produce a price. MyJobQuote gives its own average total next to the rate, and the Which? range covers one stated size of garage. The flat roofing hub has the wider picture.
Why one rubber roof differs from the next
The membrane is only part of a rubber roof. Several things around it change what a particular roof costs, and the survey is where they are found. The size of the roof matters, but so does the way into it, since materials and old waste have to travel to and from the roof.
The deck has a large say. Which? includes new boards in its garage range, which is a reminder that a roof with a sound deck and one that needs new boards are not the same job. Insulation and falls follow from the same question. Part L affects the work when a membrane is replaced, so an insulation layer may be part of the specification.
Details add up too. Rooflights, upstands against a wall, outlets, edge trims and a door threshold each need finishing properly, and a plain rectangle with none of them is a simpler job. Where a roof needs scaffold, that is part of the written price for the whole job.
The page on what an EPDM roof is explains the material itself, and the one on flat roof replacement costs looks at what goes into a replacement price.
Rubber compared with other coverings
For the same single garage, Which? gives built-up felt as £1,400 to £3,500, which puts the EPDM range of £1,950 to £4,000 in context. The two ranges overlap. Neither is a statement about your roof, so the sensible reading is that the roof and its details decide a price more than the name on the membrane.
Lifespan is part of cost as well, and the published figures disagree with each other. HomeBuilding gives EPDM as 25-30 years, and Less says an EPDM rubber membrane "typically lasts 30 to 50 years". Those are two sources with two ranges, and neither describes a particular roof. The figures for the other coverings sit on our page about how long flat roofs last.
Price is only one side of a choice between coverings, and the write-up of EPDM, GRP and felt covers the rest. What we offer on every roof is a survey first and then one written total, given in writing and covering the whole job. Photographs sent to WhatsApp on 07880 284133 are a fair way to begin, and the survey that follows is what puts a real figure on your own roof, whatever the guides suggest.

