The short answer
Black streaks on roof tiles can be algae, a thin surface growth that spreads where the tile stays damp, or staining carried down the slope by rain. On a sound roof they are cosmetic. They can also sit on tiles that are flaking or cracked, so a close look at the tile beneath the streak settles whether it is only appearance.
What the streaks may be
Algae is one possibility. It is a simple growth that colonises damp surfaces and can show as a dark, sooty film on a tile, sometimes in stripes that follow the line of water down the slope. A concrete tile has a rough, porous face that holds moisture, which gives algae a place to settle. The streaks are the growth itself, living on the surface of the tile.
Run-off is the second explanation. Rain washes dirt, pollen and fine particles down a roof, and where the water runs in the same channel again and again it leaves a visible track. A stain of that kind sits below something that sheds water, such as a ridge, a chimney or a flashing, so the pattern of the streaks can point to where the water is coming from.
Lichen and moss are different growths, though they can sit alongside algae and darken the same patch. Lichen forms crusty circles, and moss forms a soft green or brown cushion. Our page on moss, lichen and algae on roofs covers the differences between the three.
None of these names can be confirmed from a distance. A photo sent on WhatsApp to 07880 284133 offers a first look at the marks, and only a survey of the roof settles what they really are and whether the tiles under them are sound.
Cosmetic, or a sign of trouble?
On a sound tile, a dark film of algae does not make the roof leak. The covering underneath is intact, and the streaks are a matter of appearance and of how long the slope stays damp. That is true as far as it goes, and it is why a clean for algae alone is a choice and not a necessity.
The streak can also be sitting on a tile that is not sound. A tile that has lost its surface layer, or one that is cracked, can take on moisture and look darker than its neighbours. In that case the colour is a symptom, and removing the dark film would reveal a worn tile rather than cure the problem.
| What you see | What it may be | Check |
|---|---|---|
| Even dark film across a slope | Algae on damp tiles | Shade and drainage |
| Narrow stripe below a ridge or chimney | Run-off staining | The detail above |
| Dark, rough or flaking tile | Worn surface | Tile condition |
| Dark patch with a crack | Damaged tile | A repair |
The last two rows call for a repair look before any clean, because washing a damaged tile does not mend it.
What to do about them
Start by looking from the ground with binoculars, noting whether the marks follow a pattern or cover a whole slope. Check the loft after rain for damp patches that line up with a streak, and look at the gutters for grit, because tile granules in the gutter point to a worn surface.
Where the tiles are sound and the streaks bother you, a gentle clean is one route, with a treatment applied to its label. Whether to do it is a choice, as the marks do no harm to a healthy tile. Force is the thing to avoid: Marley, a tile maker, says "The use of high powered jet washes is not recommended as it can damage the surface of the slate or tile, thus reducing its expected life considerably". The page on cleaning concrete and clay roof tiles explains how the two coverings differ.
If the tiles are worn, a clean is the wrong first step. Washing a tile that is already flaking can strip more of its face, and a split tile that is wetted keeps absorbing water through the crack. Our guide to roof cleaning and tile damage explains why, and the main roof cleaning page covers the work itself.

