Call 01582 935272

Material comparison

Natural vs man-made slate

Natural slate is split from rock, and man-made slate is cast in a factory from other materials. The choice affects the pitch you need, the fixings, the look and the price. This guide compares the two under our slate roofing pages.

9 minute read

Get a written quote

Call 01582 935272WhatsApp us

Replacement slates held with copper tingles on an older slate roof
PicturedReplacement slates held with copper tingles on an older slate roof.
A roof drawing with its parts named: slates, slipped slate, tingle, battensSlatesSlipped slateTingleBattens

Rock from a quarry or a factory product

Natural slate is a metamorphic rock that splits cleanly into thin sheets. Quarry workers cut and trim the sheets into rectangles, and the roofer hangs them on timber battens in overlapping courses. Welsh and Spanish slate are the two origins that come up when homeowners compare quotes, and each is sold in grades and thicknesses by the quarry.

Man-made slate, also sold as fibre-cement or composite slate, is a manufactured tile moulded to look like the real thing. The makers differ in what goes into the mix and in how the surface is finished, which is why one product's published figures cannot be read across to another. The name tells you only that the slate is not quarried rock.

The two materials side by side
PointNatural slateMan-made slate
OriginQuarried rockFactory product
EdgesSplit and trimmedCut or moulded
Figures to readQuarry and gradeThe maker's product sheet
Pitch limitSet by the code and the slateSet by the product

A roofer can lay either one, and a good survey does not start from a preference. It starts from the roof: its angle, its timber, the way it is reached and what the house already wears. Those facts narrow the choice before price enters the discussion. A pitched roof with a shallow slope, a heavily cut roof full of hips and valleys, and a plain gable each push the decision in a different direction, and a photograph from the garden may not show enough to settle it.

What is published about lifespan for natural slate

HomeBuilding's new-roof guide, last updated on 30 September 2025, lists approximate lifespans for three natural slates: 100+ years for Welsh slate, 75-100 years for Spanish natural slate and 50-80 years for reclaimed Welsh slate. The guide offers no ranking beyond those figures, so they belong in a sentence as approximations and nothing firmer.

For man-made slate there is nothing in that table to quote. A fair lifespan comparison needs the maker's own figure for the exact product, stated with its conditions, such as the pitch and the fixing method it was designed for. A salesperson who offers one number for all man-made slate is giving an opinion rather than a measured result.

Be careful with anyone who ranks the two materials on durability as if the matter were settled. The published numbers cover natural slate, and a league table with nothing behind it helps nobody choose. Ask for the product literature in writing and read the small print about the roof it was designed for.

Lifespan also depends on parts that neither material controls. Nails, battens, underlay, lead and the ridge all age on their own schedules, a point explored in our guide on how long a slate roof lasts.

Price: what the published figures cover

MyJobQuote's slate roof figure, dated 6 October 2026, reads "The average cost of fitting a slate roof is around £7,800." It does not say whether the slate is natural or man-made, and it gives no house size, so it is a general average and describes no particular roof.

HomeBuilding ties its figure to a roof size and a covering. A three-bedroom semi with a 65m² roof and plain concrete tiles "may cost between £10,000 and £15,000", and the guide adds that "The cost of a Welsh slate roof for the same property might reach £18,000". The words "may" and "might" belong to the guide and stay attached to the sums.

The two sources answer different questions, so this guide does not stretch them into one range. Neither prices man-made slate, and a price for that comes from the supplier's quotation and the survey of your roof.

  • the area of roof to be covered
  • the shape of the slopes, with hips, valleys and dormers adding cutting
  • the grade or product chosen
  • whether the old battens can stay
  • the way the roof is reached

Those are the factors that move a price. Our slate roof costs guide goes further into the published figures, and the survey leads to a single price in writing.

Pitch, fixings and what the code says

Pitch is the angle of a roof slope, and it limits what can be laid on it. Cupa, a producer of natural slate, writes that BS 5534 "also indicates that the minimum roof pitch for natural slate is 20 degrees in the case of a project situated in an area with moderate exposure and with a slate 500mm long and a 115mm overlap". Change any of those conditions and the figure changes with them.

Cupa adds that "hook fixings should not be used on any pitch below 25º". Hooks are one way a slate can be held at its tail, and the rule shows why a low roof needs its fixing method chosen with care. Man-made slate carries its own minimum pitch and fixing instructions from the maker, and those govern that product.

BS 5534:2014+A2:2018 is the code of practice that is current for slating and tiling. Marley notes that installing to it "isn't required by law", yet a competent slater works to it, and a roof built outside it is harder to defend. Exposure is met through a fixing specification written for the building concerned.

A survey looks at the pitch, so a roof sitting close to a limit is flagged before any slate is ordered. Putting natural slate on the front slope and a man-made product round the back means two sets of rules, one for each.

Colour, edges and what a neighbouring roof sets

Natural slate varies from slate to slate in tone, in the texture of its face and in the line of its edge. Hung on a roof, that variation reads as a soft, uneven surface. Man-made slate can be made more uniform, which suits some houses and jars on others. Neither effect is a flaw. They are different looks, and a photograph on a screen does not show either at roof height.

Ask to see a loose sample held against the roof you are matching, outdoors, in daylight, after rain as well as when dry. Weathering changes slate, and a new slate beside an old one can look wrong for a while whichever material is chosen. A reclaimed slate, already weathered, can help on a repair where a match matters. Sample boards are a fair test, since the slate on the board is the slate that will be hung, not a catalogue picture.

Where the house is listed, the covering is a question for the council, and in a conservation area the council is the one to ask whether a direction applies. Listed building consent covers any work "in any manner which would affect its character as a building of special architectural or historic interest". An Article 4 direction can remove further permitted development rights, so we check with the council first.

Our guide to repairing or replacing a slate roof covers when a patch that matches the old slates is worth doing.

Older fibre-cement roofs and the asbestos question

Fibre-cement coverings have a long history, and some older ones contained asbestos. The Health and Safety Executive says "If the building was built or refurbished before 2000, assume that there is asbestos in it." That advice reaches roofs: a fibre-cement slate on an older house is a suspect material until it has been tested, and it is not a candidate for a quick DIY removal.

HSE also says "AC roofs are always fragile", meaning that asbestos cement sheeting can fail under a person's weight. It is a reason to keep off any old fibre-cement covering and to leave breaking and drilling alone. HSE treats asbestos cement removed carefully without being broken up as non-licensed work, while damaged or broken-up cement is notifiable non-licensed work.

Modern man-made slate is a different product from the fibre-cement of that earlier era, and a roof laid recently is not the worry. The worry is a roof of uncertain age. If you do not know when yours was laid or last refurbished, a test comes before a quote, and the result decides what happens next.

A lockable skip, never an open one, is the right container for asbestos waste. Household asbestos is not covered by the consignment-note exemption, because that exemption applies to household waste "other than asbestos waste".

Questions to put to any quote

A quote that names a material and stops there leaves out the facts that matter. Ask what the slate is, where it comes from, what thickness and grade it has and what the quarry or maker publishes for it. For a man-made product, ask for the product sheet and read its pitch and fixing lines against your own roof.

Ask how the slates will be fixed and what the battens are. Ask whether the old battens stay and what happens if they prove soft once the covering is off. Ask what is planned for the lead at the chimney, the valleys and the abutments, because lead is a separate material with its own age and its own faults.

Ask how the price is set out. Our price is put in writing as one sum once the survey is done. When two quotes divide the work into different parts, the sums are hard to compare, so look for a document that states the whole job and what it covers, and put the two side by side.

For a first look, send photographs of the roof to 07880 284133 on WhatsApp, or ring 01582 935272. The survey settles the pitch, the timber and the access that decide between the two materials.

Questions on choosing a slate

01Is man-made slate cheaper than natural slate?

Neither published figure here covers man-made slate, so no price comparison can honestly be made. MyJobQuote gives an average of around £7,800 for fitting a slate roof without saying which kind, and HomeBuilding says Welsh slate might reach £18,000 on a 65m² semi. A quote for either material reaches you on paper after the survey visit, and it can be compared with any others you hold, side by side.

02Which lasts longer, natural or man-made slate?

The published lifespans for slate are for natural slate: HomeBuilding gives 100+ years for Welsh, 75-100 for Spanish and 50-80 for reclaimed Welsh, all approximate. For a man-made slate, read the maker's own figure for that product and the conditions attached to it. Nails, battens and lead on the roof matter as well, whichever slate is on top, so each one is checked during the survey before any material is recommended.

03Can I mix natural and man-made slate on one roof?

It can be done, but each material carries its own minimum pitch and fixing rules, so both sets apply at once. A slope that suits one product may not suit the other. Raise the idea at the survey, with photographs of each elevation, so the roof's angles can be measured before any mixed scheme is priced or ordered. Check also that the two products suit the same battens and the same nail or hook, because a roof that mixes fixing methods is harder to repair later.

04What pitch does natural slate need?

Cupa quotes BS 5534 as indicating 20 degrees for natural slate, but only for moderate exposure, a 500mm slate and a 115mm overlap; for hooks, the cut-off is 25º. Those are conditions, not a blanket figure to apply to every house, which is why pitch is measured on site. A survey measures your own pitch, and the slate and fixing method are then chosen to suit it.

05Does a conservation area limit my choice of slate?

It can. A conservation area on its own does not remove the right to re-roof a house, but an Article 4 direction can remove permitted development rights there. Listed building consent applies to work that would affect a listed building's character. Give us the address and the council can be asked about it before anything is ordered, or you can ask it yourself.

Get a written price for your roof

10-year workmanship guarantee, in writing

Tell us about your roof

Call WhatsApp Written quote