The short answer
A tingle is a narrow strip of metal, folded or shaped to grip a replacement slate and nailed to a batten under the slates either side. It takes the place of the nail fixing a slate would otherwise have. A tingle suits a small, local repair, and it cannot make a worn-out covering sound again.
What a tingle is and where it goes
A slate roof is built in rows, and each slate is fixed with nails near its head and covered by the slates in the course above. That arrangement hides every fixing, which is what keeps the roof watertight. It also creates a problem when a single slate cracks or slips. The nail holding it is out of reach, and the surrounding slates sit on top of the spot where a replacement would otherwise be fixed.
A tingle solves that. It is a narrow strip of lead or another soft metal that is fixed to the batten beneath the gap. The free end is turned up so that it can hold the bottom edge of the new slate, which is slid into place from below and held by the strip. Nothing has to be nailed through the slate itself, and the slates above stay undisturbed.
Some tingles are made as a copper or stainless clip rather than a strip of lead, and the shape varies from one roofer to another. The idea is the same in each case: a small fixing, hidden under the slate, takes the place of a nail that cannot be reached. The wider slate roofing page covers how the rest of the covering is fixed.
When a tingle is a fair repair
A tingle is a repair for a roof that is otherwise sound. It makes sense where one slate, or a few spread across the roof, has cracked, chipped or slipped while the nails and battens around them are still in good order. The replacement takes a few minutes to fit, and the repair does not disturb the surrounding slates or the timbers beneath.
- A single cracked or missing slate in an otherwise firm field of slates.
- A slate that has slipped out of line but is itself unbroken, and can be pushed back and held.
- A small number of replacements after a branch, a ladder or a tradesman's boot has broken a slate.
A tingle does not cure whatever caused the slate to go missing in the first place. If the cause was one careless knock, the roof carries on as before. If the cause was a corroded nail, the slates around the gap are likely to be next, and each tingle is only a patch on a larger problem. That is the point at which a survey looks at the nails and the battens themselves, covered in the page on nail fatigue on a slate roof.
When re-slating is the better answer
Tingles can pile up. A roof with a dozen of them across several slopes is telling the owner something: the fixings are failing in more than one place. Each repair is a small cost on its own, but the access, the ladder or scaffold time and the risk of cracking more slates while working all repeat with every visit.
The question to ask is what is holding the slates on. Where a survey finds that the nails have rusted through across a whole slope, or that the battens are soft, re-slating that slope is more sensible than adding strips to it. Slates that are in sound condition can be reused, and they are relaid on new battens with new fixings. Whether that is worth it depends on how much of the covering is still good.
Whichever route suits the roof, a handful of tingles or a stripped and relaid slope, the price we give after the survey is a single figure in writing. The repair-against-replace question is covered in repair or replace a slate roof, where the two routes are set side by side, with the signs that point each way.

