Call 01582 935272

Cost

Slate roof costs

MyJobQuote gives an average of around £7,800 for a fitted slate roof, while HomeBuilding says Welsh slate on one example semi might reach £18,000. This guide sets the published figures out with their sources, under our slate roofing pages.

9 minute read

Get a written quote

Call 01582 935272WhatsApp us

A slim black conservation rooflight sitting flush in a Georgian slate roof
PicturedA slim black conservation rooflight sitting flush in a Georgian slate roof.
A roof drawing with its parts named: slates, slipped slate, tingle, battensSlatesSlipped slateTingleBattens

The published range for a slate roof

Anyone asking what a slate roof ought to cost meets figures that depend on how each publisher worked. MyJobQuote's slate roof entry, dated 6 October 2026, reads "The average cost of fitting a slate roof is around £7,800." It is an average, and it comes with no house size, no slate grade and no description of access.

HomeBuilding's new-roof guide, last updated on 30 September 2025, prices an example instead. A three-bedroom semi with a 65m² roof and plain concrete tiles "may cost between £10,000 and £15,000", and "The cost of a Welsh slate roof for the same property might reach £18,000". The roof size, the example house and the words "may" and "might" all travel with the sums.

Which? Trusted Traders priced "Replacing entire roof on an average three-bedroom house" at £7,000 to £21,000, excluding VAT, from a survey of 11 traders gathered in November 2025. That range spans every covering, so it frames the question without answering it for slate.

The three sources were not built to agree, and they do not. Take each as a marker on the map, and take your own survey as the only figure that describes your own house, since the markers say nothing about its slopes, its slate or its timber. Slope, slate grade, timber and access drive a real roof away from them.

Published whole-roof figures side by side

Each slate-relevant figure keeps its source and its basis, because a number cut loose from its source is easy to misuse. No row is added to another, and none is turned into a rate per square metre.

Published slate-related figures and their sources
Source and dateWhat it pricesFigure
MyJobQuote, 6 October 2026Fitting a slate roofAverage around £7,800
HomeBuilding, 30 September 2025Welsh slate, 65m² semiMight reach £18,000
HomeBuilding, 30 September 2025Plain concrete tiles, same semiMay cost £10,000 to £15,000
MyJobQuote, 3 November 2026A new roof, any coveringAverage around £5,250

Look at what each row leaves out. The MyJobQuote entries come with no VAT basis. The HomeBuilding rows are for a single roof size and a single kind of house. A figure from one row cannot be set against a figure from another without losing something on the way.

The concrete tile row appears because HomeBuilding places it beside Welsh slate for the same house, and that comparison is the guide's own. The row is no guide to a man-made slate, whose price has to come from the supplier, and nothing in this table covers that product. Nor does the concrete figure tell you which covering suits your roof: that depends on its pitch, its timber and its look, which the survey establishes.

What moves a price on a real roof

Slate prices rise with the area of the roof and with how awkward it is to cover. A plain gable is a simple job. A roof broken up by hips, valleys, dormers and chimneys needs more cutting and more lead. The angle counts too: a steep slope asks for more care in handling and fixing, and a low one narrows the choice of fixing method.

The slate itself is a variable. Welsh, Spanish and reclaimed slate are separate products with separate prices, and each comes in grades and thicknesses. A grade chosen to match an existing roof or a conservation area can cost more than a standard one, and the price follows the product.

  • the area of the slopes and the number of them
  • hips, valleys, dormers and abutments needing lead
  • the slate chosen, and its grade
  • whether the old battens and underlay can stay
  • how the roof is reached, and scaffold where needed

Access is a real cost. Scaffold on the pavement or road needs a scaffold licence from the highway authority; we arrange the licence with our scaffolder. That work sits inside the single price you are given, which is one more reason a quote that describes the roof is easier to judge than a bare number.

Repair figures: what the sources give

Published repair figures cover tiles and general roof work, and slate repairs are not priced on their own. MyJobQuote's average roof repair is around £650 in 2026 (6 October 2026). From Which? Trusted Traders come £75 to £400 for one to six tiles and £80 to £300 for a single ridge tile, and its prices leave out VAT. They are guides to scale rather than slate prices.

MyJobQuote's ridge tile replacement entry reads "In 2026, the average ridge tile replacement costs between £225 and £550." (1 October 2026). That is a different range from the Which? figure for a similar job, and the two stay separate, each with its own date and source.

For chimney leadwork, MyJobQuote puts a patch repair at around £200 and a full replacement at around £570 on average, or between £350 and £920 depending largely on whether scaffolding is required (22 September 2026). Those are chimney figures. They are not prices for valleys or for lead elsewhere on a slate roof.

Hips and single slates are not priced in any of these figures, so a repair that involves either is priced after the survey. Our guide to repairing or replacing a slate roof shows how the work is chosen.

How to read a slate quote

A useful quote names the roof it is for. It says which slopes are covered, which slate is being laid and in what grade, and what happens to the battens, the underlay, the lead and the ridge. It says whether old slates are being reused and what happens if more break than expected.

Be wary of a quote that is a figure with no description beneath it, since two of those cannot be compared. A document that scatters sums over several pages hides the whole job in a different way. What helps is a single clear total with the scope written out in words beside it.

Any quote from us is a single sum put in writing when the survey is over. It carries no rate per square metre and no figure that could be multiplied by the area of your roof, because a roof is not a uniform sheet and the work is not uniform either. A repair to a valley and a straight run of slope are different tasks.

What a slate quote should state
PointWhy it matters
Slate and gradeSets the product and its price
Battens and underlayDecides what is renewed
Lead and ridgeSeparate materials with their own ages
Reuse of old slateChanges what is bought

Rules that sit alongside the price

A full re-roof is a larger step than a repair, and different rules apply. In the Planning Portal's re-roofing guide, work needs no application normally if "Less than 25 per cent of the total 'building envelope'" is affected and "Less than 50 per cent of the roof is affected". Relaying a whole roof goes beyond that second limit.

The Portal's main re-roofing page adds: "In most situations, this work will need Building Regulations approval." Either the council's building control team or a registered building control approver carries out that control. Separately, "15 per cent or more" on the weight of the roof covering calls for approval, and the Portal points to a structural engineer or surveyor.

Our guide to slate roofs and Building Regulations goes further. None of it changes the shape of a quote, but it does fix the order of events, since the route is checked before any work starts and the checking takes time.

Where the roof is in a conservation area or on a listed home, the council may need to be consulted first, and that can bear on the slate chosen. Raise it at the start of the conversation, because a covering that has to be changed late costs more than one that was right from the beginning.

Cost, lifespan and what to weigh

Price is half the picture, since the same money buys different lengths of service. HomeBuilding lists approximate lifespans of 100+ years for Welsh slate, 75-100 years for Spanish natural slate and 50-80 years for reclaimed Welsh slate. They describe the covering and not the nails, battens or lead, which age on their own schedules.

Dividing a price by a lifespan produces a neat annual figure and a misleading one. A roof is a set of parts, and a failing batten can cut short the working life of sound slate. A lower price for a thinner grade, or slate laid on tired timber, is a different product from the full job even when the slate looks the same from the road.

Weigh the cost against what the survey finds. A roof that needs only repair does not need a new covering, and a roof with failing fixings on every slope is a poor candidate for repeated patching. Our guide to how long a slate roof lasts sets out the lifespans in more detail.

Photographs sent to 07880 284133 on WhatsApp make a start, and so does a call to 01582 935272. The survey comes next, and the price that follows it covers the whole job as a single written total, set out in plain words once the slopes have been seen.

Questions on slate roof prices

01What is the average price of a slate roof?

MyJobQuote gives around £7,800 as the average cost of fitting a slate roof (6 October 2026), and HomeBuilding says Welsh slate on a 65m² three-bedroom semi might reach £18,000. Which? Trusted Traders gives £7,000 to £21,000, excluding VAT, for "Replacing entire roof on an average three-bedroom house". None of these describes your house, and the survey is where your own figure comes from.

02Why do the published slate figures differ so much?

Each source states its own basis. One is a platform average, one prices a named example semi at a named roof size, and one is a range from a survey of 11 traders for a whole roof of any covering. They are listed with those details so that none is mistaken for another, and none is added to another. Read each one with its own date beside it, since a cost page can be updated.

03Is slate dearer than concrete tiles?

On HomeBuilding's example, yes: plain concrete tiles on a 65m² three-bedroom semi may cost between £10,000 and £15,000, while Welsh slate on the same semi might reach £18,000. That is one source and one example roof, and the order of the two prices is the point and not the pounds. A price for your own roof rests on its size, its shape, how it is reached and what condition it is in.

04Does scaffold add to the cost of a slate roof?

Access is part of what drives a slate roof price, and scaffold, where the job calls for it, is covered by the written price. Scaffolding on the pavement or road needs a scaffold licence from the highway authority; we arrange the licence with our scaffolder. Whether a roof needs scaffold at all is decided at the survey, once the height, the slopes and the ground below are known.

05Can I get a price for a slate roof without a survey?

A published average or example works as a guide and no more, because the work depends on the roof. Hips, valleys, battens and fixings change the work, and none of them shows in a photograph taken from the garden. Photographs sent to 07880 284133 give a first view of the roof, and the survey that follows leads to a single written price for your roof. Until then, any figure for slate is a range that your own roof may sit inside or outside.

Get a written price for your roof

10-year workmanship guarantee, in writing

Tell us about your roof

Call WhatsApp Written quote