The short answer
A chimney capping stone is a slab laid across the top of a chimney stack. It covers the brickwork beneath, throws rain clear of the stack's faces and can carry the pot or pots. When it cracks or loosens, water can enter the stack, so it is looked at during any chimney survey.
What a capping sits on and covers
Brick courses cannot simply stop in mid-air. At the top of a stack they finish under a slab of concrete or stone, laid across the whole width of the brickwork. The slab is the capping stone. Pots stand on it or pass through it, each one bedded in mortar, and the flue openings run up through the slab so that smoke can leave. Like the pots and flashings above the roofline, it belongs to the stack work described under chimney repairs, and it is the part a ladder reaches last.
The slab is wider than the stack beneath it, so it overhangs the brick faces slightly. A drip groove may be cut into its underside, which lets rain run off the edge instead of creeping back along the underside towards the wall. These details are small, but together they keep water away from the joints below, where it would otherwise soak in.
People mix the capping up with the flaunching, because the two are neighbours. The capping is the slab over the stack top. Flaunching is the sloped mortar collar at the base of each pot, covered on the chimney flaunching page. A stack can have a sound slab and worn flaunching, or the reverse, which is why a survey looks at both.
How a capping fails over time
A slab sits in the weather with nothing above it. Rain, frost and sun work on it from every side, and the mortar bed under it ages as well. Water that reaches a crack or a gap can freeze, and as it turns to ice it expands, which can widen the crack and loosen the pieces around it.
- Cracks running across the slab, or a corner that has broken off.
- A slab that rocks when touched, or sits slightly out of line.
- Gaps or crumbling in the bed of mortar under its edge.
- Dark staining on the brick faces directly beneath the overhang.
- Moss or small plants rooted along the joint.
- Pots that lean, because what they stand on has moved.
A leaning pot or a rocking slab matters more than a hairline crack, because movement means the bed has already let go. Staining below the overhang is worth a closer look, since it points to water running down the brickwork rather than clear of it. The signs of chimney damage guide lists what else can show on a stack, indoors and out. Whatever shows on the slab, the bed under it and the brick faces below it all bear on the repair, so they are weighed together before a method is chosen.
Re-bedding, replacing or rebuilding
A sound slab on a loose bed can be lifted, the bed made good and the slab set back down. A cracked slab is replaced with a new one cut to the stack's size. Either job needs access at the top of the stack, so the work starts with a ladder or scaffold, and if the frame sits on the pavement or road, a licence is needed from the highway authority; we arrange the licence with our scaffolder.
Sometimes the slab is not the real problem. If the brick courses under it are soft, bulging or loose, a new slab would sit on weak ground. Those courses are taken down and rebuilt first, and the slab goes back on last. Whether that is needed is a judgement made at the stack itself, so a repair of this kind is priced once the survey is complete.
After a survey, the written quote is a single total. The chimney repair costs guide explains what moves a chimney price, from access to the amount of brickwork involved, and why a figure given from the pavement can be wrong in either direction.

