The short answer
Chimney flaunching is the sloped mortar fixed around the base of each chimney pot on top of a stack. It secures the pot and carries rain outward, away from the flue opening. When the mortar cracks or crumbles, water can reach the stack and the chimney breast below.
What flaunching is and where it sits
On top of a stack, each pot has a ring of mortar built up around its base. That ring is the flaunching. It starts thick against the pot and falls away in a smooth slope to the edge of the capping, so that anything landing on it runs outward and drips clear. A pot without it would have nothing to stop rain collecting in the angle where the pot meets the stack. Its shape, not its thickness, is what makes it work.
The mortar does two jobs at once. It anchors the pot, since pots are not otherwise fixed down, and it makes the top of the stack watertight around the flue. Both jobs depend on the mortar staying whole. A collar that has crumbled can leave the pot sitting loose, and a loose pot is a hazard as well as a leak. A pot with no firm bed can be pushed over by a strong gust, and the roof and the ground below are in its path.
Flaunching is easily confused with the slab beneath it and with the pointing in the brickwork. Different parts, different repairs. The chimney repointing page covers the joints in the brick, and the wider stack is described under chimney repairs. Each of these parts can fail on its own, so one sound item does not clear the others.
Signs that flaunching has cracked
The mortar is exposed on all sides, with weather above it and a hot, damp flue below. It shrinks, cracks and wears, and water that gets into a crack can freeze and push it wider. The flaunching also lies where nobody looks, high on the stack, so it can deteriorate unseen for a season or more. Binoculars from the garden show some of the signs below, though not the underside of the collar.
- Hairline cracks running across the slope, or round the pot.
- A gap between the mortar and the pot's wall.
- Crumbling or sandy mortar, with pieces fallen onto the roof.
- A collar worn almost flat, which no longer sheds water.
- A pot that moves when touched or leans to one side.
- Dark streaks on the brick faces below the pot.
Water that gets past damaged flaunching runs down the flue wall and through the stack. The stain may appear on the breast indoors, which is the problem the why is my chimney breast damp answer works through. Damp on a breast does not prove the flaunching has failed, since flashings and pointing leak as well, and the survey separates one source from another.
How flaunching is redone
Repair starts at the top. Loose and crumbling mortar is chipped away until sound material is reached, and the pot is checked for movement, since a pot set in failed mortar needs lifting and re-seating level. Fresh mortar is then built up around the base and tooled to a smooth fall, leaving no gap between it and the pot. The finished collar should look like a smooth, shallow cone, with no ridges where water could settle.
Working there means reaching the top of the stack. Scaffolding on the pavement or road needs a scaffold licence from the highway authority; we arrange the licence with our scaffolder. Flaunching is a small repair in itself. The capping, the pots and the brickwork can all be looked at in the same visit, since all three share the same weather and the same access. Doing them together saves a second climb and a second set of access arrangements.
Our survey of the stack comes first, then a single written total. The chimney repair costs guide covers what shapes it, such as the stack's height, the access it needs and how much brickwork has worn.

