Call 01582 935272

Pitched roofing

What is BS 5534?

BS 5534 is the standard that sets out how tiles and slates are laid and fixed on a pitched roof. Its current edition is BS 5534:2014+A2:2018.

Get a written quote

Call 01582 935272WhatsApp us

A stack of new clay plain tiles on a scaffold board
PicturedA stack of new clay plain tiles on a scaffold board.

The short answer

BS 5534 is the British Standard covering slating and tiling on pitched roofs and on vertical cladding. The current edition is BS 5534:2014+A2:2018, which replaced the +A1:2015 text. It is guidance, not law, and it governs how coverings are fixed, including mechanical fixing for ridge and hip tiles.

A roof drawing with its parts named: ridge tiles, tiles, battens, underlay, raftersRidge tilesTilesBattensUnderlayRafters

What the code covers

Behind every pitched roof covering sits a set of rules about how it should stay put. BS 5534 provides them. The full title is long, but the content is plain. It deals with how clay tiles, concrete tiles and natural slates are laid, how they are fixed and what the fixings must resist once the roof is out in the weather. It also covers vertical cladding, where tiles or slates are hung on a wall in place of a roof.

The edition in force is BS 5534:2014+A2:2018. The British Standards Institution lists it as current, and the +A1:2015 edition that it supersedes is withdrawn. The text after the plus signs records that the 2014 document has been amended twice, so the latest year marks an amendment rather than a brand-new standard, and a quote that names the code should name this edition.

Standards that sit around BS 5534
StandardWhat it coversStatus
BS 5534:2014+A2:2018Slating and tiling code of practiceCurrent
BS 8612:2018Dry-fixed ridge, hip and vergeCurrent
BS 5250:2021Managing moisture in buildingsCurrent, under review

Not law, but the benchmark in practice

This is guidance on doing a job properly. It is not an Act of Parliament and it is not a Building Regulation in its own right. Marley, the tile maker, states that installing to BS 5534 isn't required by law. That does not make it optional in spirit. A new covering still has to meet Building Regulations, and the code is the reference a competent roofer works to when fixing tiles and slates.

Marley also records that the 2015 changes to the code made it clear that mortar could no longer be relied upon as the only means of securing the roof covering. In the past, edge and ridge tiles could be held in place by mortar and nothing else. The expectation now is a mechanical fixing, such as a nail, clip or screw, with mortar as an addition and not the sole restraint.

The code is also where the rule for ridge and hip fixings comes from. Ridge or hip tiles should be mechanically fixed to resist the calculated wind uplift force, which is why dry-fixed systems under BS 8612:2018 have grown up beside it. The dry ridge system answer describes how those are assembled.

Fixing specifications and what it means for you

The code's minimum fixings are not the last word. Marley says they will always be superseded by the generation of a Fixing Specification, which is site specific. That document takes the exposure of the individual roof into account, so a pair of neighbouring houses with identical tiles can need different fixings. No wind-zone figure is given for any town here, because only the calculation for the roof being worked on counts.

Slate gives one illustration of a figure taken from the code. Cupa, a slate supplier, says BS 5534 also indicates that the minimum roof pitch for natural slate is 20 degrees in the case of a project situated in an area with moderate exposure and with a slate 500mm long and a 115mm overlap. Cupa adds that hook fixings are not to be used on any pitch below 25 degrees. That is one supplier's reading for one set of conditions. The minimum pitch guide lists pitches product by product.

For a homeowner the useful step is a question. Ask the roofer how the covering will be fixed and whether the work follows BS 5534 and a fixing specification for your roof. Daylight Roofing writes one total price after a survey, and a photo of loose tiles sent to 07880 284133 on WhatsApp can start the conversation. Re-covering a whole roof passes the 50% limit and needs Building Regulations approval, as the re-tiling and building regulations guide explains. More is under pitched roofing.

BS 5534, asked plainly

01Is BS 5534 a legal requirement?

No. Marley says installing to BS 5534 isn't required by law. The trade treats the code as the benchmark for the work. Separately, a new roof covering has to comply with Building Regulations, and a roofer following the code is working in line with accepted good practice for fixing tiles and slates on your house. A fixing specification then adds the detail for your roof in particular, so ask to see what it says.

02Which version of BS 5534 is current?

BS 5534:2014+A2:2018 is current, according to the British Standards Institution's listing. The earlier +A1:2015 edition is withdrawn. If a quote or specification cites an older version, that is worth querying, since the amended text is the one in force and the older one no longer applies to new work on a roof. A quick message to the roofer will clear it up.

03Does BS 5534 ban mortar on a roof?

No. Marley says that, from the 2015 changes onward, mortar could no longer be relied upon as the only means of securing the roof covering. Mortar can still be present, but tiles are expected to be held by mechanical fixings as well. Ridge and hip tiles in particular should be mechanically fixed against wind uplift, which is the case whether the ridge is mortared or dry-fixed.

04Who decides how my tiles are fixed?

The fixing specification written for the site decides it, since that takes in exposure and always supersedes the code's minimums, according to Marley. The roofer works from it, and you can ask what it says for your roof. The written quote after the survey sets out one total for the job, with the covering fixed to that specification, and the fixings are not a separate decision made on the day.

Get a written price for your roof

10-year workmanship guarantee, in writing

Tell us about your roof

Call WhatsApp Written quote