The short answer
Clean a slate roof gently. Jet washing is "not recommended" for slate by Marley, because it can damage the surface and cut the slate's expected life. Soft brushing and a suitable wash are the milder methods, and because slate cracks underfoot the work is done from proper access equipment, not by walking on the roof.
Why a pressure jet is the wrong tool
Moss, lichen and algae change how a slate roof looks, and a grey-green film on the courses can prompt the wish to blast it off. That is the method to avoid. Marley, a roofing manufacturer, gives this advice: "The use of high powered jet washes is not recommended as it can damage the surface of the slate or tile, thus reducing its expected life considerably".
A slate sheds water through its surface and its laps, so a roof whose slates are worn down by cleaning is a roof that may fail sooner than it needed to. Damage of that kind may not show for some time. The surface of the stone is part of how the roof does its job, and it is the part that cleaning can easily spoil.
None of this means a slate roof is left to grow green. A cosmetic tidy is weighed against what the roof may lose, and a soiled slate that is sound and shedding water is not a fault in itself. The question to ask first is whether the slates beneath the growth are in good condition, and whether the fixings holding them are sound as well. A roof with a few green patches and no other trouble may be better left alone than treated harshly.
Gentler ways to clean slate
Milder methods lift growth without stripping the stone.
- Dry brushing with a soft brush removes loose moss and debris before any wash is applied.
- A low-pressure rinse, used from a safe distance, clears what the brush has loosened.
- A surface treatment designed for roofs can be applied and left to work, with the product's instructions followed and plants and downpipes protected.
- Gutters and valleys are cleared afterwards, since washed-off growth ends up there.
Every one of these jobs happens on the roof, and slate cracks under a boot. The work is therefore done from a ladder at the eaves, from scaffolding or from a roof ladder, not by walking the slope, and a roof with slipped or cracked slates is repaired before it is cleaned. The page on walking on a slate roof explains why. Debris brushed or washed off a roof ends up in the gutters and downpipes, which is why they are part of the same job and not an afterthought.
Product choice matters as well. Treatments differ in what they contain and how they should be applied, and the maker's instructions and safety data are what decide how one is used. A roofer who is asked to clean a roof should name the product and the method before the work starts.
What cleaning costs and when to call a roofer
On price, Checkatrade's roof cleaning guide (April 2026) says roof cleaning "typically costs between £8.50 and £14 per m²". The figure is per square metre only and carries no VAT basis, and it describes cleaning in general, so it is a starting point for comparison, not a price for the roof in question. Our quote follows once we have been over the roof, and it is a single figure on paper.
Cleaning is a good moment to look at the roof closely. Slipped slates, cracked pieces, a loosening ridge and failing flashings are easier to spot on a clean slope, and they are worth dealing with before growth hides them again. The slate roof problems page lists the faults to look for.
If you are unsure whether a roof needs cleaning or repair, a photograph from the ground, sent to 07880 284133 on WhatsApp, is a place to begin. The slate roofing page describes the repairs and renewals we do, and the repair or replace a slate roof guide helps when cleaning shows the roof needs more than a wash. Do not wait for the next wet spell to find out how the slates beneath are doing.

