Call 01582 935272

Pitched roofing

What are roof battens?

Roof battens are the narrow timber laths nailed across the rafters that every tile or slate is hung from. The covering is only as secure as the laths carrying it.

Get a written quote

Call 01582 935272WhatsApp us

A gutter full of leaves, moss and a broken tile after a storm
PicturedA gutter full of leaves, moss and a broken tile after a storm.

The short answer

Roof battens are slim timber laths fixed across the rafters, over the underlay, that tiles or slates hang from. Their spacing sets how the covering laps, and their nails carry the fixing load. Rotten or loose battens can let tiles slip, so a re-tile is the moment they get judged and, where needed, renewed.

A roof drawing with its parts named: daylight, damp stain, purlin, loft hatchDaylightDamp stainPurlinLoft hatch

What battens do on a pitched roof

Look at a pitched roof in section and the layers run in a clear order. The rafters sit at the bottom. Over them lies the underlay, the sheet that catches water that gets past the covering. Fixed on top are the battens, laths running horizontally across the slope. Tiles or slates hang from the battens by their nibs or are fixed to them with nails and clips.

That makes the batten the link between the covering and the roof structure. It holds each course of tiles at the right height, so the laps between courses stay the same all the way up the slope. If the spacing drifts, a tile can end up with too little overlap, and rain driven up the slope then has a way in.

Battens also carry fixing load. Under BS 5534, the standard for tiling pitched roofs, the way each tile is fixed comes from a specification drawn up for that one roof, allowing for its exposure. That only works if the timber holding the nails is sound. Marley, the tile maker, says installing to BS 5534 isn't required by law, but a roofer working to the code is following the specification that the fixings depend on.

Some roofs add counter-battens, a second set of laths running up the slope beneath the horizontal ones. The arrangement depends on the underlay and the covering, so a survey checks which one a roof has before any quote is written.

Rot, nail fatigue and other signs of trouble

Battens are hidden under the covering, so trouble shows itself through the tiles above. Timber that stays damp can rot. Where the underlay has torn or slipped, or where a long-running leak has soaked the same patch, a batten can soften and rot. Nails can also loosen in their holes as timber swells and dries, and a nail that has worked out lets the tile it held shift.

  • Tiles that have slipped down the slope, leaving a gap in the course above.
  • A run of tiles that rocks or lifts when touched, or a ridge line that looks uneven.
  • A sagging or wavy section against the rest of the slope.
  • Daylight showing between the laths when you look up from the loft.
  • Dark, crumbling or soft-looking timber under the covering, if the loft hatch gives a view.

A torch from the loft hatch lets you look without stepping on the joists. Never walk on a pitched roof to check, and never put weight on the covering.

A sign does not always mean the battens have failed. A single slipped tile can be a nail that has let go, with the batten beneath it perfectly sound. Lifting the tiles and looking is the only sure way to tell, and that is what a survey does. The slipping tiles answer covers the other causes.

Battens in a re-tile and what it costs

In a full re-tile the old covering comes off and the battens are exposed. That is the moment to judge them. Sound timber can sometimes be kept, though the spacing has to suit the new covering. A different tile has a different gauge, so battens set for the old tiles may not line up for the new ones. Where battens are rotten, split, or nailed to rafters that have themselves decayed, they come off and new ones go on. The new tiles on old battens answer goes through that decision.

A new covering over the full roof goes past the 50% limit, so it needs Building Regulations approval. That is dealt with in the re-tiling and building regulations guide.

Cost comes down to scale. Which? Trusted Traders, in a survey of 11 traders in November 2025 with prices excluding VAT, gave a range of £7,000 to £21,000 to strip and renew the whole roof of an average three-bedroom house. Battens are one part of that job, and what they add to the total depends on the condition of the timber.

Daylight Roofing gives one written total price after surveying the roof. If battens need renewing in part or in whole, that is settled at the survey. A photo of a slipped tile sent to 07880 284133 on WhatsApp is a fair starting point. The wider range of work sits under pitched roofing.

Questions about battens, answered

01Are roof battens the same as rafters?

No. Rafters are the large timbers that form the frame of the roof and run from the ridge down to the walls. Battens are the thin laths fixed across the rafters, over the underlay, to hold the covering. A roof can have sound rafters and failing battens, or the other way round, so the two are assessed separately when the roof is surveyed.

02Can new tiles go on the old battens?

Sometimes. The old battens have to be sound, and their spacing has to match the gauge the new tile needs. Where they are rotten, split or set out for a different tile, new ones are fixed. That is judged with the covering stripped back, because the timber cannot be properly seen while the tiles are still on, and a quote follows the survey.

03How can I tell whether battens have rotted?

From the ground you cannot say for certain. Slipped tiles, a sagging slope or damp patches on the ceiling below point towards a problem. If the loft hatch gives a clear view, a torch may show dark or soft timber under the covering. Only lifting tiles confirms it, so keep your feet on the ground, or the loft floor, and send a photo instead. Listing what you can see from the garden helps too.

04Do battens need to meet a standard?

Yes, in the sense that BS 5534:2014+A2:2018 is the current code covering slating and tiling. It sets out how coverings are fixed, and the fixings themselves are decided in a specification written for the site. Marley says installing to BS 5534 isn't required by law, but the standard remains the reference point for securing a roof covering, and a roofer working properly follows it throughout.

Get a written price for your roof

10-year workmanship guarantee, in writing

Tell us about your roof

Call WhatsApp Written quote