Call 01582 935272

Slate roofing

How thick are roof slates?

A roof slate looks like a thin grey plate, and its thickness is part of how it is chosen. The product and the specification decide the figure, and one house can differ from the next.

Get a written quote

Call 01582 935272WhatsApp us

Cracked mortar under a ridge tile on a slate roof
PicturedCracked mortar under a ridge tile on a slate roof.

The short answer

Roof slate thickness varies by product, by supplier and by the grade of slate, so no one figure covers every roof. The roof's specification sets it, together with the slate length, the pitch and the exposure of the site. A natural slate is split by hand or machine, so its thickness also varies across a single piece.

A roof drawing with its parts named: slates, slipped slate, tingle, battensSlatesSlipped slateTingleBattens

Why thickness varies from slate to slate

A roofing slate is thin, but it is not uniform. Natural slate is split from blocks of rock along its natural layers, and the splitter or the machine decides how thick each piece is. The result is a surface with slight ripples and an edge that is never perfectly even. Two slates cut from the same block can differ a little, and slates from different quarries can differ more.

Suppliers sell slates in grades and sizes, and each grade has its own range of thickness. A fibre cement or other man-made slate is made differently: it is produced to a pattern in a factory, so the thickness is set by the manufacturer for that product, and one slate matches the next. The differences between the two families are set out in natural against man-made slate.

For a reader, the point is simple. Asking how thick roof slates are has no one-number answer, because the question needs a product name attached to it. Any figure quoted on its own, with no product or maker named, is not a reliable guide to what is on a particular roof, or to what a replacement would need to be.

What thickness affects on the roof

Thickness is part of how the covering is designed, and it ties in with other choices. A slate has to be strong enough to take the nail or the hook that holds it, and thick enough to resist being cracked by wind or by a person stepping on it. Those are properties of the product, and the maker's data for each grade is what a specification draws on, along with how the roof is shaped, how steep it is and how exposed the house stands.

  • Fixing: a slate must carry its nail holes or its hook without splitting, which is part of why a thin or brittle slate may be hooked instead of nailed.
  • Appearance: thickness shows at the edges, where a thicker slate gives a heavier shadow line along each course.
  • Handling: a thicker slate is harder to cut and trim neatly around valleys and hips.
  • Cost: the grade and the size of slate are part of what shapes the price of a roof.

None of these gives a minimum figure for thickness, and none can be turned into a rule from the ground. The headlap, the pitch and the exposure are all set alongside the slate, and the page on headlap on a slate roof shows how those items belong together.

How to check what is on your roof

Thickness cannot be read from the pavement. A slate on a pitched roof is seen from its face, and its edge is only visible at the foot of each course, in shadow. Only a close look at a slate in the hand can show it, which is why a photo cannot settle it and a roofer has to handle a slate.

If you are planning a repair or a new covering, the useful questions are about the product. Ask the supplier for the name of the slate, its origin, its grade and its size, and ask for the maker's data sheet. A roofer can match a replacement against the slates already on the roof, and for a close match on an older roof, reclaimed slates may be worth considering, as what reclaimed slate is explains.

Our price follows the survey, and it is a single written figure for the job. Cost averages for slate roofing are quoted for the roof as a whole and say little about thickness, so they do not settle the question either. To get started, a photograph of the roof can go to 07880 284133 on WhatsApp.

Slate thickness, answered without guesswork

01Is a thicker roof slate better?

Not as a rule. A slate is chosen to suit the roof, the pitch, the fixings and the exposure, and a thicker one is not automatically the right choice for every house. Thickness can affect how a slate takes a nail, how it looks at the edge and how it is cut, so the product is matched to the job in the specification instead.

02Are fibre cement slates the same thickness as natural slates?

There is no set comparison. A manufactured slate has a thickness fixed by its maker for that product, and natural slate varies by grade and by piece. Thickness alone does not put one material above the other, and a comparison needs the product names on both sides of it before any figure means anything. Ask each supplier for its own data sheet and set the two side by side, with the grade, the size and the origin of every slate written down, so that the thicknesses you read belong to named products.

03Can I measure a slate that has fallen into the garden?

You can pick up a fallen slate and measure it with a ruler or callipers, but handle it with care, because the edges are sharp, and keep it for the roofer rather than throwing it away. It helps to note which slope it came from. If an old roof may contain asbestos cement, do not handle a broken piece; leave it and ring 01582 935272.

04Will a replacement slate be the same thickness as the old one?

Not necessarily. A new slate from a different quarry or maker may differ from a weathered one, which can leave a replacement standing slightly proud or sitting slightly low in its course. A match is closer when the slate is the same product or a reclaimed slate of similar age, and the specification for the repair records which slate is to be used.

Get a written price for your roof

10-year workmanship guarantee, in writing

Tell us about your roof

Call WhatsApp Written quote